How to check how long your Christmas lights will last
Every December the same box comes down from the loft, and the same question comes with it: are these lights good for another year, or is this the season they give up? The pages that rank for this question are guides — a lighting site's lifespan article, a home-improvement list of LED facts, a retailer's LED-versus-incandescent comparison — and none of them takes your set and gives you a verdict. This page does: say what kind of lights they are, how old they are, how many hours a night and nights a season they run, where they live and what condition they are in, and it tells you the seasons left, the year to replace them, and whether to keep them, replace them soon, or replace them now.
To use it:
- Say what kind of lights they are. LED mini, LED C7/C9, incandescent mini, incandescent C7/C9, or solar LED. The type decides the rated life: LEDs are rated 25,000–50,000 hours, incandescents only 1,000–3,000.
- Say what quality the set is. Budget strings fail far sooner than their headline rating — cheap LEDs may last only 10,000–20,000 hours — while premium commercial-grade sets reach the top of the range.
- Say how many seasons they have been used. Count every season they were hung, even a short one. Ranges use the midpoint, so the hours figure is an estimate.
- Say how many hours a night and nights a season they run. Six hours a night for 45 nights is 270 hours a season; a set left on all day burns through its rated life four times faster.
- Say where the lights live. Indoors, outdoors under cover, or fully exposed. Outdoor exposure wears the wire and sockets before the bulbs, so exposed sets get a shorter practical life.
- Say what condition they are in. All working, a few bulbs out, flickering, whole sections dark, or frayed wire. Frayed wire is a safety verdict on its own — the set is done, whatever its age.
- Read the verdict, then the dates. The seasons-left figure and the replacement year are estimates from the published rated hours, adjusted for location and condition. The yearly wire inspection matters more than the arithmetic: a set that looks damaged is done, whatever the maths says.
What makes this checker different
The pages that rank for this question today are articles and guides — Alibaba's product-insights pieces on LED longevity, Family Handyman's list of LED facts, Angi's LED-versus-incandescent comparison, a retailer's waterproofing guide. All of them quote the same figures in words: 25,000–50,000 hours for LED, 1,000–3,000 for incandescent, L70 at 25,000 hours. None of them turns your set's age and use into a number of seasons left or a year to replace it. The cost calculators that rank nearby (including our own running-cost calculator) answer a different question — what the lights cost to run, not how long they will last. This page is the only one that takes your set's type, quality, age, hours and condition and turns them into seasons left and a replacement year — for 5 types, 3 qualities and 5 conditions — and it says plainly where every figure comes from: the U.S. Department of Energy (LED bulbs 30,000–50,000 hours), Family Handyman (LED durability tests), Angi (LED vs. incandescent Christmas lights) and UL 588 (seasonal decorative lighting) — all as published in November 2026.
When is this the right check?
Whenever the box comes down and you are not sure whether the set is good for another year — before you spend an afternoon hanging lights that will fail in a week, before you buy a replacement you may not need, and before you plug in a set you have not looked at since last January. It is also the right check when a section goes dark mid-season, when the set starts flickering, and when you are choosing between LED and incandescent for a new set. It is not a substitute for looking at the wire: dates are only planning figures, and a damaged set is done whatever the maths says.
Honest limitations
Seasons left is an estimate, not a guarantee
Rated hours are manufacturer lab figures, and real life — weather, storage, voltage spikes — shortens them. The seasons-left figure is a planning number, and the yearly wire inspection matters more than the arithmetic.
The wiring fails before the bulbs do
For LED strings the wire, sockets and plugs usually give out long before the bulbs reach their rated hours. A set can fail years before its rated life runs out — which is why the checker asks about condition, not just age.
Age ranges use the midpoint
When you pick "4 to 6 seasons", the checker counts 5 seasons of use; "7 to 10 seasons" counts 8.5. If you know the exact number of seasons, the figure is closer — but it is still an estimate either way.
Cheap strings vary wildly
Budget LEDs are rated in the checker at 15,000 hours, inside the published 10,000–20,000-hour range for cheap imports — but unbranded strings vary a lot, and some fail within 5,000 hours. A budget set that flickers or loses sections is telling you its real life, whatever the rating says.
Solar sets age differently
For solar strings the bulbs are rarely the limit — the rechargeable battery and the panel usually age first, often in 2 to 4 seasons. The checker rates the bulbs, and flags the battery separately, so a dim solar set may only need a fresh battery.
Figures dated November 2026
The figures quoted here are as published in November 2026: U.S. Department of Energy (LED bulbs 30,000–50,000 hours), Family Handyman (LED durability tests), Angi (LED vs. incandescent Christmas lights), UL 588 (seasonal decorative lighting, via LED Lighting Info). Lighting standards change rarely, but re-check the sources if you read this much later.