Is my tap water hard or soft?

White crust on the taps, spots on the glasses, soap that will not lather — or a hardness number from a test strip or your utility’s report that means nothing on its own. Enter the number, or answer the signs at your tap, and this checker gives you the verdict — soft, moderately hard, hard or very hard — on the USGS scale, plus what to do about it. Free, in your browser, nothing uploads.

  • USGS scale: 0–60 mg/L is soft
  • A strip gives a band in a minute
  • A TDS meter won’t tell you hardness
  • Free, no account, nothing uploads
Is my tap water hard or soft? Check it in seconds.

Check whether your tap water is hard or soft

Try a preset:
0 of 8 answered

Your result

Answer the questions Your verdict appears here as you answer.
Recommended action

Answer the questions above and the recommended action will appear here.

Blockers

Things that do not fit

Things to check

Still to confirm

What to do next

    Your result summary

    
              

    Answer the questions above — the verdict updates live.

    Privacy you can verify, not just trust

    Checking whether your tap water is hard by uploading your water details to a website would be backwards — the check should never be the leak. This one can't: your answers are checked on your device, and they never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Answer a question above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — the checker still works.

    How the hard-or-soft check works

    Whether your tap water is hard or soft is a measurement, not a feeling. Hardness is the dissolved calcium and magnesium in your water, and the US Geological Survey calls 0–60 mg/L soft, 61–120 mg/L moderately hard, 121–180 mg/L hard, and above 180 mg/L very hard. One grain per gallon is 17.1 mg/L, one German degree is 17.8 mg/L, and one Clark degree is 14.3 mg/L — so a number in any of those units lands on the same scale. A test strip gives you a band in about a minute; a drop kit or a lab test gives you a number. Without a number, the signs at your tap do the talking: white crust on the taps, spots on the glasses, soap that will not lather, and dry, itchy skin. This checker weighs both — your number if you have one, and the four signs if you do not — and gives you a verdict: soft, moderately hard, hard or very hard, plus what to do about it.

    To use it:

    1. Say how you want to check. A hardness number (test strip, drop kit or utility report), or no number — judge by the signs at your tap. A hardness number is a measurement; the signs at your tap are the evidence when you have no number.
    2. Enter your hardness number and its unit. From a test strip, a drop kit, or your utility’s annual water quality report — leave it blank if you have no number. Strips and reports use mg/L or grains per gallon; German and Clark degrees are common in Europe and the UK.
    3. Say what the limescale looks like. No crust or deposits anywhere; light — some furring in the kettle, spots on glass; or heavy — crust on taps or showerhead, chalky deposits. White crust on taps or showerheads and furring in the kettle are the clearest signs of hard water.
    4. Say how the soap lathers. Soap lathers easily, plenty of suds; some lather, but soap scum on the bath or sink; or barely lathers — filmy residue, soap feels waxy. Hard water makes soap work harder: less lather, more scum, a filmy residue.
    5. Say what the kettle and dishwasher look like. No problems — kettle and dishwasher are clean; spots on dishes and glasses, kettle furring; or scale inside the kettle, cloudy glasses, appliance repairs. Spots on dishes, cloudy glasses and scale inside the kettle are hard water’s calling cards.
    6. Say how your skin and hair feel after washing. Skin and hair feel normal after washing; dry skin, dull or flat hair; or itchy, dry skin and a soapy residue feeling. Soap residue stays on skin and hair when the water is hard — dry, itchy skin and dull, flat hair.
    7. Say where your water comes from. Mains supply (utility water); private well; or mains water, already through a softener. Mains water has a utility report; a private well needs its own test; a softener should already be softening.

    The four verdicts, and what each one means

    Soft — no softener needed

    0–60 mg/L, or no scale and soap that lathers easily. There is nothing to soften: soap lathers easily, scale barely forms, and a softener would be money spent for nothing. Keep an eye on the kettle — if furring appears later, test again, because a utility can change sources.

    Moderately hard — mostly fine, watch the kettle

    61–120 mg/L, or light furring and some soap scum. A nuisance, not a problem: descale the kettle every month or two, use a rinse aid in the dishwasher, and check the hardness again in a few months. A softener is a choice, not a need, at this level.

    Hard — scale is costing you soap and appliance life

    121–180 mg/L, or heavy crust and soap that barely lathers. Hard water is costing you soap and appliance life: descale the kettle and showerhead, use dishwasher salt and rinse aid, and price a softener — at this level the soap and appliance savings start to cover it.

    Very hard — a softener will pay for itself

    Above 180 mg/L, or crust on the taps, soap that will not lather and scale inside the kettle. Very hard water is doing real damage to kettles, water heaters and washing machines, and wasting a lot of soap. Get a hardness number first, then size a softener from it — above 180 mg/L softening is generally recommended.

    What makes this checker different

    The pages that rank for this search are guides and postcode lookups. The guides — Water Advisor, SofterTap, Boise City Water and Angi — explain how to test hardness and how to read the number, but none of them gives you a verdict for your tap. The lookups — Water Softener Sizer, Crystal Quest and Water Hardness Lookup — give you a regional estimate from your ZIP code and sell you a softener; they do not take a test-strip reading, and they do not look at the signs at your tap. None of them takes your number or your signs and turns them into a personal verdict with what to do next — and none of them checks whether the softener you already have is actually working. This page is that answer: a number or the signs, an instant verdict on the USGS scale, the blockers named, and the next steps. It is a self-assessment, so it says plainly what it cannot know: it cannot test your tap water, and where the answer is unclear it says test it instead of guessing.

    When is this the right check?

    When the kettle furs up a month after you descaled it and you are wondering whether the water is the problem — because the answer decides whether descaling is a chore or a softener is the fix. When your utility’s report lists a hardness number and you have no idea what it means — because 45 mg/L and 250 mg/L call for opposite responses, and the checker puts your number on the USGS scale. When the soap will not lather and the glasses come out spotted, and you want to know whether it is the water or the detergent — because the signs together are the evidence, and the checker scores them. And when you already have a softener and the water still reads hard — because the salt may be empty or the settings wrong, and the checker says so instead of letting you buy a second softener.

    Honest limitations

    A self-assessment, not a water test

    This checker cannot test your tap water. It runs your number or your signs against the USGS hardness scale as it reads in November 2026, entirely in your browser. A test strip or a lab test is the authority for your tap — and where the answer is unclear it says test it instead of guessing.

    A strip gives a band, not a precise number

    A test strip tells you which band you are in, not where inside it: a result that looks like “about 7 grains” could be 5 or 9. For a yes-or-no answer about whether your water is hard, that is enough. For sizing a softener, use a drop kit or a lab test.

    Your utility’s report is a system-wide average

    The annual water quality report gives the hardness range for the whole system your utility serves. Your tap can differ if your area gets a blend of sources, or if your plumbing is old. A home test confirms what actually reaches your house.

    A private well needs its own test

    A well has no utility report, and well hardness varies by depth and season — the water in the town around you tells you nothing about your well. A strip, a drop kit or a lab test is the only way to know, and a lab test is the best choice if you are buying treatment equipment.

    Hard water is not a health hazard

    Hardness is calcium and magnesium, and the EPA does not regulate it as a contaminant — it is not a drinking-water safety issue. The problems are practical: soap scum, spots on glasses, scale on fixtures and shorter appliance life. Do not let a softener salesperson turn a nuisance into a health scare.

    Rules from official sources, dated November 2026

    The rules here are the USGS hardness scale, EPA guidance, Penn State Extension and utility water quality reports, as they read in November 2026. Guidance changes: recheck with your water utility if anything about your water, your home, or your household changes.

    Frequently asked questions

    How can I tell if my tap water is hard or soft?

    Look for white crust on taps or showerheads, spots on shower glass and dishes, and soap that does not lather easily — those are the signs. For a number, dip a hardness test strip in a glass of cold tap water and match the colour to the chart, or find the hardness figure in your utility's annual water quality report. This checker turns either a number or the signs into a verdict.

    What is a good water hardness number?

    On the USGS scale, 0–60 mg/L is soft, 61–120 mg/L is moderately hard, 121–180 mg/L is hard, and above 180 mg/L is very hard. Below 60 mg/L you need nothing; above 180 mg/L a softener is generally recommended. One grain per gallon is 17.1 mg/L, so 10.5 grains per gallon is about 180 mg/L.

    How do I convert grains per gallon to mg/L?

    Multiply grains per gallon by 17.1 to get mg/L, or divide mg/L by 17.1 to get grains per gallon. A reading of 7 grains per gallon is about 120 mg/L — the line where water starts to count as hard. German degrees multiply by 17.8, and Clark degrees by 14.3. This checker does the conversion for you: enter the number and pick its unit.

    Is hard water bad for your health?

    No. Hard water is dissolved calcium and magnesium, and the EPA does not regulate hardness as a contaminant — it is not a drinking-water safety issue. The minerals in hard water are the same ones found in food. The problems are practical, not medical: soap scum, spots on glasses, scale on fixtures and shorter appliance life. If your skin is dry and itchy, hard water can add to it, but it is not a health hazard.

    Do I need a water softener?

    Above 180 mg/L (10.5 grains per gallon) softening is generally recommended; between 121 and 180 mg/L it is worth pricing one, because the soap and appliance savings start to cover it. Below 60 mg/L you do not need one at all. Size any softener from a real number — a test strip, a drop kit or a lab test — not from the signs alone, and check the salt level first if you already have one and the water still reads hard.

    Will a TDS meter tell me my water hardness?

    No. A TDS meter measures all dissolved solids, not just calcium and magnesium, so its reading does not tell you how hard your water is. Worse, a softened tap often reads higher on a TDS meter than before the softener, because the softener swapped calcium for sodium ion-for-ion. Use a hardness test strip, a drop kit or a lab test instead.

    How do I test water hardness at home?

    Four ways, cheapest first: your utility's annual water quality report lists hardness for free; a test strip costs a few dollars and gives a band in about a minute; a drop-count titration kit costs more and gives a number, with each drop usually equal to one grain per gallon; a certified lab test costs about $20 and is the most accurate, and the best choice for a private well. Test cold water from a tap upstream of any softener, filter or fridge dispenser, and run the tap for 30 seconds first.

    Does this checker replace a water test?

    No. This checker is a self-assessment: it runs your number or your signs against the USGS hardness scale as it reads in November 2026, entirely in your browser, and nothing you enter leaves your device. A web page cannot test your tap water. A test strip or a lab test is the authority for your tap — and a private well needs its own test, because no utility report covers it. The only third-party requests are the site's own analytics, which count page views.