How the frozen-pipe check works
A tap that gives nothing on a cold morning is the classic frozen-pipe moment — but it is not the only one. A tap that gives only a thin trickle, a tap that works while the one next to it does not, a house where every tap is dry at once: each of those points at a different pipe, and each needs a different answer. This checker asks eight questions — what the water does, which taps are affected, how cold it has been, where the pipes run, what you can see on them, any sounds or smells, and whether you know where the main shut-off valve is — and turns the answers into a verdict and a step-by-step plan, in the order you should do the job.
To use it:
- Try the tap that is acting up, hot then cold. A frozen pipe shows up as a thin trickle or no water at all from a tap that worked yesterday. If you have not tried a tap yet, say so — the checker will not guess, it will tell you to run the taps first.
- Say which taps are affected. One tap dry while the rest work means the pipe feeding it froze. Several taps in one part of the house means a branch line. Every tap dry means the freeze may be at the main line coming in — and the water company comes first, not the plumber.
- Say how cold it has been. Uninsulated pipes are at real risk after roughly 6 hours below 20°F (−7°C), or about 12 hours between 20°F and 32°F. If it has not been cold at all, the cause is probably something else — a closed valve, or a problem in the street.
- Say where the pipes run. Pipes in unheated garages, crawl spaces and attics freeze first, followed by lines on outside walls. If you cannot see where they run, say so — the checker treats that as unknown, not as safe.
- Look at the pipes you can see. Frost on the outside of a pipe is a direct sign of ice inside it. A bulge or a crack means the pipe is under pressure and at real risk of splitting — do not try to thaw it, shut off the main valve and call a plumber.
- Listen and sniff. Banging, clanking or whistling when you run water can mean water pushing past a partial ice blockage. A bad smell from a drain can mean ice trapping waste that would normally flow away.
- Say whether you know where the main shut-off valve is. A split pipe starts leaking when it thaws, so find the valve before you thaw anything. If you do not know where it is, the checker says so plainly — it is the most important thing in the house right now.
- Read the verdict — and the plan. The verdict tells you whether a pipe is frozen, whether it has split, or whether it is probably something else. The plan lists the steps in order, so you can walk through them one by one.
What makes this checker different
The pages that rank for this search are guides from local plumbers and home-advice sites. Every one of them lists the same five signs and leaves you to judge your own house. None of them asks which taps are affected, how cold it has been, or whether you know where the main valve is — and none of them tells you what to do when the answer is a bulge, or when every tap in the house is dry. This page is that answer: eight questions, four verdicts, and a plan that changes with the signs — including the emergency plan for a split pipe, and the water-company-first plan for a frozen main line. It is a planning aid, so it says plainly what it cannot know: it cannot see your pipes, and where your answers are uncertain it says so instead of guessing.
When is this the right check?
When a tap gives nothing on a cold morning — because the first question is whether it is one tap or every tap, and the answer decides who to call. When a tap gives only a trickle — because a partial blockage can still be thawed safely if you catch it before it splits. When you can see frost, or a bulge, on a pipe — because that is the moment to stop thawing and shut off the water. And when every tap in the house is dry — because the freeze may be at the main line, and the water company comes first.
Honest limitations
A planning aid, not plumbing advice
This checker cannot see your taps, your pipes or your forecast. It cannot tell you exactly where the ice is, or whether a pipe you cannot see has already split. If you can see water where it should not be, or a pipe that has burst, call a plumber.
The split you cannot see
A frozen pipe often splits inside a wall, where you cannot see it. The damage shows only when the ice thaws and the water starts spraying — which is why the main shut-off valve matters more than the thawing. Find the valve before you thaw anything.
A trickle is still a freeze
A tap that gives only a thin trickle is not "mostly fine" — it is a partial ice blockage, and the pressure building behind it is what splits pipes. Keep the tap open while you thaw, and do not stop heating at the first trickle: the ice may only be partly melted.
Every tap dry is a different problem
One dry tap is a frozen branch pipe. Every tap dry is a frozen main line — or a problem in the street. Ask a neighbour before you call anyone: if they have water, the freeze is on your side; if they do not, the water company comes first.
Never thaw with a flame
If a pipe is already frozen, open the tap it feeds and warm the section slowly with a hair dryer, a heating pad, or towels soaked in hot water. Never use a torch or an open flame, and never use a propane or kerosene heater indoors — the fire risk is worse than the frozen pipe.
Rules from the Red Cross and the plumbers, dated November 2026
The rules here are the published guidance as they read in November 2026: the American Red Cross on keeping the faucet open while you thaw and never using an open flame, and the plumbers on the signs — one dry tap, frost, a bulge, banging and smells — and the 6-hour rule below 20°F. Guidance changes: recheck with those sources if anything about your plans changes.