Should you cover your outdoor taps tonight?

Every guide says the same thing — fit a foam cover — but a cover only works when the line behind it is empty. A cover on a tap with the hose still on, or the water still on, is decoration on a pipe that is about to split. Answer ten questions and this checker gives you the verdict for your taps — cover it tonight, drain it first, or leave it alone — with a step-by-step plan. Free, in your browser, nothing uploads.

  • 28°F hard-freeze rule
  • Cover vs drain — decided for you
  • About 5 minutes per tap
  • Free, no account, nothing uploads
Should I cover my outdoor taps? Check each tap in seconds.

Check whether to cover your outdoor taps

Try a preset:
0 of 11 answered

Your result

Answer the questions Your verdict appears here as you answer.
Recommended action

Answer the questions above and the recommended action will appear here.

Your cover plan

    Blockers

    Things that do not fit

    Things to check

    Still to confirm

    What to do next

      Your result summary

      
                

      Answer the questions above — the verdict updates live.

      Privacy you can verify, not just trust

      Checking whether to cover your outdoor taps by uploading your home details to a website would be backwards — the check should never be the leak. This one can't: your answers are checked in your browser, and they never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

      New cross-origin requests during use: 0
      1. Press F12 to open developer tools, then the Network tab.
      2. Answer a question above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
      3. Extra credit: disconnect your internet after this page loads — the checker still works.

      How the outdoor tap cover check works

      Outdoor taps are the first thing to freeze when the temperature drops — the American Red Cross lists hose bibs first among the pipes that freeze most often. But the right answer is not the same for every tap, and it is not always "fit a cover". A cover adds insulation around the faucet body and blocks wind, which slows heat loss — but it does not add heat, and it does not stop water in the wall or supply pipe from freezing if that pipe still holds water. A cover can help a drained faucet survive a short cold snap, but it cannot protect a live line that still contains standing water. This checker asks ten questions — tonight's low, how many hours below freezing, when the first hard freeze is due, the tap type, whether a cover is already on, whether a hose is still attached, whether the indoor valve is closed and the line drained, how exposed the tap is, and whether a tap has split before — and turns the answers into a verdict and a step-by-step plan, in the order you should do the job.

      To use it:

      1. Say how cold tonight gets, and for how long. A hard freeze is about 28°F (−2°C) held for four hours or more. A short overnight dip is a different problem from a multi-day hard freeze: the longer the cold lasts, the more likely the pipe behind the wall gets cold enough to freeze.
      2. Say when the first hard freeze is due. The cover goes on before it arrives. If a hard freeze is forecast tonight, fit the cover before dark. If it is weeks away, there is no cover to fit yet — but buy the covers now, while the shops still have them.
      3. Say what kind of tap it is. A frost-free tap has a long barrel running back through the wall and the handle usually sits on a slight angle. A standard tap is short, with the valve right at the wall. If you are not sure, say so — the checker treats an unknown tap as a standard tap, which is the safe default, and tells you how to tell.
      4. Say whether a cover is already on — and what kind. A proper foam cover is the season-long fix. A DIY towels-and-bag cover will help tonight, but it soaks through and loses its insulation over a winter, so the checker tells you to swap it.
      5. Say whether a hose is still attached, and whether the indoor valve is closed. These two answers decide whether a cover is enough. A hose left on traps water in the tap; a valve left open leaves the line full of water. Either way, a cover alone will not save the tap — the checker says so plainly and gives you the draining steps first.
      6. Answer the rest — wind exposure, split before, how many taps, where you are. Wind strips away the trapped-air insulation a cover relies on, so a light frost on a north-facing tap behaves like a hard freeze. A previous split raises the stakes on the spring check; the tap count works out the time — about 5 minutes per tap.
      7. Read the verdict — and the plan. The verdict tells you whether to cover it tonight, fit a cover before the freeze arrives, drain it first because a cover alone will not save it, or leave it alone. The plan lists the steps in order, so you can walk outside and do them one by one.

      What makes this checker different

      The pages that rank for this search are how-to guides — a home-improvement site, a lifestyle magazine, a plumbing guide, a home-services marketplace. Every one of them gives you the same advice and leaves you to judge your own tap. None of them asks how cold tonight gets, how many hours below freezing, whether a hose is still attached, or whether the line is drained — and none of them tells you when a cover is not enough. This page is that answer: ten questions, a verdict that changes with the cold and the tap, and a plan that stops at the step you cannot do and tells you what to do instead. It is a planning aid, so it says plainly what it cannot know: it cannot see your taps, and where your answers are uncertain it says so instead of guessing.

      When is this the right check?

      When autumn arrives and you are not sure whether to bother — because the answer depends on the tap and the forecast, not the season. When a hard freeze is forecast tonight — because fitting a cover takes about five minutes per tap and the window is short. When you have just moved into a house and do not know what kind of tap it is — because a frost-free tap with the hose off needs almost nothing, and a standard tap with the water still on needs draining first. And when the first freeze has already passed — because the checker tells you the damage may already be there, hidden inside the wall, and the spring check is the moment it shows.

      Honest limitations

      A planning aid, not plumbing advice

      This checker cannot see your taps, your pipes or your forecast. It cannot tell you whether a specific pipe is already frozen, or whether your tap was installed with the right pitch. If you can see frost on a pipe, or water where it should not be, call a plumber.

      The split you cannot see

      The damage from a frozen hose bib almost never happens at the spout. It happens half a metre back, inside the wall, where the split pipe sits quietly all winter and then delivers mains pressure into the wall cavity on the first warm day in spring. That is why the spring check — turn it on while someone watches the wall inside — matters as much as the covering.

      A cover does not replace draining

      An insulated foam cover helps, and it is the right finishing touch on a drained tap. But it does not empty the line. For a standard tap with the water still on, the draining is the job — the cover is the last step, not the fix.

      Frost-free does not mean freeze-proof

      A frost-free tap only drains itself if it was installed with a slight downward pitch to the outside. A unit fitted dead level, or pitched slightly inward, holds water in the barrel no matter how carefully you shut it off. If yours does not dribble briefly after closing, treat it as a standard tap and shut off the supply indoors.

      The fit is the whole point

      A cover only works if it sits flat against the siding. Gaps let cold air move behind the cover, and moving air strips away the trapped-air insulation the cover relies on. On rough siding, pack the gap so no cold air can move behind it — a cover that hangs loose is barely better than no cover at all.

      Rules from the Red Cross and the tap makers, dated November 2026

      The rules here are the published guidance as they read in November 2026: the American Red Cross on which pipes freeze and how to drain an outdoor faucet, the tap makers on how a frost-free sillcock drains and why a hose left attached defeats it, and the 28°F hard-freeze definition used by city water departments. Guidance changes: recheck with those sources if anything about your plans changes.

      Frequently asked questions

      Should I cover my outdoor taps in winter?

      Yes, before the first hard freeze — about 28°F (−2°C) held for four hours or more. A foam cover adds insulation and blocks wind, which slows heat loss. But a cover is the last step, not the whole job: disconnect the hose first, and on a standard tap close the indoor shut-off valve and drain the line, because a cover cannot protect a pipe still full of water. This checker works out the exact verdict from tonight's low, the tap type, the hose, the valve and the cover.

      Do outdoor faucet covers really work?

      Yes, but only in the narrow way they are designed to work. A cover traps a pocket of still air around the faucet body and shields it from wind, which slows heat loss — it does not add heat, and it does not stop water in the wall or supply pipe from freezing if that pipe still holds water. A cover can help a drained faucet survive a short cold snap, but it cannot protect a live line that still contains standing water. It only works if it sits flat against the siding, with no gap for cold air to move behind it.

      When should I put covers on my outdoor taps?

      As soon as you are done using the tap for the season, or around the first frost at the latest — before the first hard freeze, which is about 28°F (−2°C) held for four hours or more. There is no reason to wait: a cover costs about $5 to $10 and takes about five minutes per tap. If a hard freeze is forecast tonight, fit the cover before dark.

      What happens if I leave the hose attached?

      A connected hose stops a frost-free tap draining and turns a well-designed tap into a closed pipe full of water. The water freezes, builds pressure and splits the pipe — usually half a metre back, inside the wall, where you cannot see it. The split sits quietly all winter and leaks when you turn the water back on in spring. Disconnect the hose, splitters and timers, drain the hose and store it somewhere it will not freeze solid — before you fit the cover.

      Do I need to cover a frost-free tap?

      Yes — a cover is good extra protection even on a frost-free tap. A frost-free tap shuts the water off 150 to 350 millimetres inside the heated house and the barrel drains itself when you close it, but only if the hose is off and it was installed with a slight downward pitch to the outside. A cover adds insulation around the faucet body and blocks wind, which is exactly what a tap on a north-facing or wind-exposed wall needs.

      Can I use towels instead of a foam cover?

      In a pinch, yes: old rags or towels wrapped around the faucet, with a plastic bag over them as a wind screen, can get you through a cold snap. But towels soak through and lose their insulation over a winter, so they are not a season-long fix. A proper foam cover costs about $5 to $10, lasts for years, and is designed to sit flat against the wall with no gap for cold air.

      What if the first freeze has already passed?

      Fit the cover anyway, and watch for the spring leak. A split pipe sits quietly inside the wall all winter and only leaks when you turn the water back on, so the damage may already be there without showing. In spring, take the cover off, close the tap first, then open the indoor valve slowly, and turn the tap on while someone watches the pipe and the wall inside. If you see a drip, a damp spot or a puddle, shut the indoor valve right away and call a plumber.

      Does this checker give plumbing advice?

      No. This checker is a planning aid: it runs your answers against the published guidance as it reads in November 2026, entirely in your browser, and nothing you enter leaves your device. A web page cannot see your taps, your pipes or your forecast, so it says plainly what still needs checking — above all, how cold tonight gets, what kind of tap it is, whether a hose is still attached, and whether the line is drained.