How the heating cost is worked out
There is no single price for heating a home, because the answer is your home's heat loss multiplied by your fuel price. This calculator does that multiplication in the open: it estimates how much heat your home loses, works out how much fuel that heat takes at your system's efficiency, and prices the fuel at the tariff you enter. Every assumption is labelled as an estimate, and the tariff defaults are named with their sources, so you can see exactly where each number comes from — and correct the one that matters most, your tariff.
To use it:
- Say where you live. Your country sets the currency and fills in a typical tariff for your heating type: the UK uses the Ofgem price cap for October to December 2026 (26.32p per kWh for electricity, 7.97p for gas), the USA uses EIA averages (18.2 cents per kWh for electricity, $1.47 per therm for gas, $4.09 per gallon for oil), Germany uses Eurostat and Destatis household averages for the first half of 2026 (36.2 cents per kWh for electricity, 11.6 cents for gas), Canada uses illustrative averages (about 14 Canadian cents per kWh for electricity), and Australia uses the energy regulator's Default Market Offer average (about 33 Australian cents per kWh for electricity). Where no official figure was found — heating oil in the UK and Germany, gas in Australia — the default is labelled a typical estimate, and you should check your last bill or delivery.
- Say how big the heated part of your home is. The floor area you actually heat, in square metres or square feet. A typical UK semi is about 100 m²; a typical US home is about 1,800 sq ft. The bigger the home, the more heat it loses — roughly in proportion to its size.
- Say how many rooms you heat. Count the rooms you actually warm up. This gives you the cost per room, and it is what the one-room comparison is worked out from.
- Say what heats your home. Gas boiler, electric radiators, heat pump, oil boiler or electric space heaters. A heat pump moves heat instead of making it, so each unit of electricity delivers about 3 units of heat; a boiler burns fuel at 80–95% efficiency; electric heat is 100% efficient but electricity is the dearest fuel per kWh.
- Say what you pay for fuel. The unit price from your bill, in whatever unit your bill uses — per kWh, per therm, per cubic metre, per litre or per gallon. The calculator converts it to a price per kWh of heat (1 therm is 29.3 kWh, 1 m³ of gas is 10.55 kWh, 1 litre of heating oil is 10.7 kWh, 1 gallon is 40.6 kWh). If the number on your bill is higher than the default, your real cost is higher than the default answer — correct this box first.
- Say how efficient your system is. For a boiler, the efficiency in percent — modern condensing boilers run 85–95%, older ones 70–80%. For a heat pump, the seasonal COP — typically 2.5 to 3.5 for a cold-climate system. The box fills itself in with the usual figure for your system; change it if you know yours.
- Say how many hours a day the heating runs. Most homes heat for 8 to 16 hours a day in winter. Heating for 16 hours costs a third more than 12 hours for the same home, so this is the second-biggest lever after the tariff.
- Say how long your heating season is. November to March is about 150 days in the UK and much of the USA; a mild winter or a warmer climate may be nearer 120 days, a cold one nearer 180.
- Say how well insulated your home is. Insulation decides how fast the heat escapes. The calculator uses a rule of thumb: 120 watts per m² of peak heat loss for a poorly insulated home, 95 for average, 70 for good and 50 for excellent. A draughty home can need twice the heat of a well-insulated one the same size — which is why insulation is the biggest saving in the tips.
- Say how far you turn the thermostat down at night. The setback when everyone is asleep or the house is empty. Each degree lower saves roughly 7% of heating energy, so a 2°C setback cuts about 14% off the season's cost.
The three numbers that matter most
Your tariff
The unit price is the single biggest lever. Doubling the price per kWh doubles the bill, whatever the home. Check the unit price on your own bill before trusting any calculator's default — tariffs vary by supplier, region and contract, and the defaults here are national averages.
Your hours
Heating for 16 hours a day costs a third more than 12 hours. Shortening the heating day — switching off an hour earlier in the morning and an hour earlier at night — is the fastest free saving most homes can make.
Your insulation
A poorly insulated home can need twice the heat of a well-insulated one the same size. Loft insulation, draught-proofing and cavity wall insulation cost money up front, but they cut every winter's bill for as long as you live there.
What makes this calculator different
The pages that rank for this search are guides — a table of average costs by heating system, a table of average bills by state, a local guide for one town. None of them asks about your home: not its size, not your tariff, not how many hours you heat, not your insulation. They all give you the average home's answer, which is nobody's answer. The two calculators that do exist are for one place only — Long Island, and New Hampshire — and they price a fuel switch, not your winter. This page is your home's answer: your size, your system, your tariff, your hours, your insulation, with the cost per day, per week, per month and per room, the cheapest system for your home, and whether heating one room beats heating the whole house.
When is this the right calculator?
When the first cold snap arrives and you want to know what the winter will actually cost before the bills land — because a seasonal figure you can plan around beats a monthly average that hides the coldest weeks. When you are choosing between heating systems — because the comparison prices all five for your home at your country's rates. When you are wondering whether to heat one room and leave the rest cold — because the one-room figure tells you whether the saving is real or imagined. And when the bill looks too high and you want to know why — because changing the tariff, the hours and the insulation one at a time shows you which one is doing the damage.
Honest limitations
An estimate, not a quote
This calculator works out the cost from the numbers you enter, entirely in your browser. It cannot read your meter, know your tariff, measure your heat loss or see how draughty your home is. It excludes standing charges, delivery fees, servicing and hot water. If you are choosing a new boiler or heat pump, get a quote from a heating engineer.
The heat-loss figures are rules of thumb
Peak heat loss of 50 to 120 watts per m² by insulation level is a rule of thumb, not a heat-loss survey. A real survey measures every wall, window, floor and draught. If your home has unusually high ceilings, large single-glazed windows or a badly draughty extension, the real heat loss — and the real cost — will be higher than this calculator says.
Weather is averaged away
The calculator spreads the season evenly over the days you enter. In reality January costs far more than November, and a cold snap costs far more than a mild week. The seasonal total is the honest figure; the per-day figure is an average day, not a cold day.
Some defaults are estimates, not official figures
Heating oil in the UK and Germany and gas in Australia have no official national average in the sources checked on 21 November 2026, so those defaults are labelled typical estimates. Oil in particular moves with the market and with the size of the delivery — check your last delivery slip before trusting the oil figure.
Canadian prices vary sharply by province
Electricity in Quebec runs about 7 to 8 Canadian cents per kWh, while Alberta runs about 15 cents and the territories past 30 cents. The Canadian defaults here are national illustrative averages — if you live in Quebec, your real cost is far lower; if you live in Alberta, it is higher. Check your own bill.
Tariff sources, dated November 2026
The default tariffs are the Ofgem price cap for October to December 2026 for the UK, EIA averages for the USA, Eurostat and Destatis household averages for the first half of 2026 for Germany, illustrative averages for Canada, and the Australian Energy Regulator's Default Market Offer average for 2026–27 for Australia, as they read on 21 November 2026. Tariffs change: recheck your own bill if anything about your contract changes.