Can this USB-C cable run your monitor — or just charge your phone?

Every USB-C cable looks identical, but they are not: some carry 4K video at 144 Hz, some only charge a phone. Answer five questions about the markings on your cable and get an instant verdict for the job you want it for — with the exact bottleneck named. Entirely in your browser.

  • Instant verdict — works, limited, or won’t work
  • Speed, video and power in one check
  • The limiting factor is named, not guessed
  • Free, no account, nothing uploads

Check your cable

Try a preset:

Your result

Answer the questions Your verdict appears here as you answer.
What this cable can do

Answer the questions above and the cable’s capability will appear here.

Limiting factors

Things to check

Still to confirm

What to do next

    Your result summary

    
              

    Answer the questions above — the verdict updates live.

    Privacy you can verify, not just trust

    Checking a cable by uploading details of it to a website would be backwards — the check should never be the leak. This one can't: your answers are checked with plain JavaScript on your device, and they never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Answer a question above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — the checker still works.

    How to check what a USB-C cable can do

    USB-C is a shape, not a speed. The same oval plug can carry USB 2.0 at 480 Mbps, USB 3.x at 5, 10 or 20 Gbps, USB4 at 20, 40 or 80 Gbps, or Thunderbolt at 40 or 80 Gbps — and it can deliver 60 W or 240 W of charging power, with or without video. Nothing on the outside tells you which one you are holding, which is why a 4K monitor stays dark on one cable and works perfectly on another that looks identical. The markings printed near the plugs are the difference, and this checker reads them for you.

    To use it:

    1. Find the markings. Look closely near either plug for a speed logo (5, 10, 20, 40 or 80 Gbps), a wattage mark (60 W or 240 W) and any Thunderbolt number. They are often tiny, printed in grey on black — hold the cable up to the light. If there are no markings at all, that is itself an answer: the cable is almost certainly USB 2.0 only.
    2. Measure the length. Speed has a length limit on passive cables: 40/80 Gbps needs 0.8 m or less, 20 Gbps about 1 m, 5 Gbps about 2 m. A long cable that claims a high speed is usually an active cable — or a lie.
    3. Pick the job. Charging a phone, charging a laptop, a 4K monitor, an SSD or a dock all ask different things of a cable. The verdict is for the job you pick, and the capability card above it shows what the cable can do in general.
    4. Read the verdict. Four outcomes: it works, it works with limits, it will not work, or the markings are not enough to tell yet. Every verdict names the bottleneck — the speed, the power, the length, or the port.
    5. Check the port too. A perfect cable cannot add video to a charging-only port. If the checker says the cable can do it and the monitor still stays dark, the port is the next suspect.

    What makes this checker different

    The pages that rank for this search are guides — thorough, but they explain the theory and leave you to work out what it means for the cable in your hand. There is no interactive tool that answers the actual question: can this cable run my monitor, charge my laptop at full speed, or move files to my SSD? This page is that answer: five questions, an instant verdict for one job, a plain-language capability summary, and the limiting factor named — with nothing to install, no account, and nothing uploaded. It is a self-assessment, so it says plainly what it cannot know: a web page cannot read the cable's e-marker chip, so anything you mark “Not sure” stays on the list until you confirm it on the cable or the maker's spec page.

    When is this the right check?

    Whenever a USB-C cable is not doing what you expected: a monitor that stays dark, a laptop that charges slowly, an SSD that copies at a crawl, a dock that only half works. Also before you buy: if a cable's listing claims 40 Gbps and 240 W but shows no markings in the photos, run the check on what you can see — and if the price looks too good for those numbers, it probably is. And whenever you inherit a cable from a drawer: five minutes with the markings tells you whether it is the one to keep with the monitor or the one to keep with the phone.

    Honest limitations

    A self-assessment, not a test

    This checker works only from the markings you enter. It cannot read the cable's e-marker chip or measure a live link — no web page can. If a marking is misread, the verdict is wrong. Confirm the exact model on the maker's spec page before buying a replacement.

    Markings can lie

    Cheap uncertified cables sometimes print a speed or wattage they cannot deliver. A printed 40 Gbps logo on a cable with no USB-IF certification and no e-marker is a claim, not a fact. Buy certified cables for anything important, and be suspicious of prices far below the certified brands.

    Length rules are for passive cables

    The length limits here apply to passive cables. Active cables have signal chips in the plugs and can beat them — a 2 m Thunderbolt cable can still run at 40 Gbps. The checker flags this whenever a length would cap the claimed speed, so a long active cable is not wrongly written off.

    The port is half the answer

    Capability is set by the cable, the source port, the charger or dock, and the destination device together. A USB4 cable cannot add video to a charging-only port, and a 240 W cable cannot charge faster than the charger it is plugged into. The checker asks about the port for exactly this reason.

    Video needs a full-featured cable

    A plain USB 3.x speed logo does not guarantee video: only a full-featured cable has the high-speed lanes wired for DisplayPort Alt Mode. USB4 and Thunderbolt cables always carry video. If a USB 3.x cable has no DisplayPort logo, the only way to be sure is to try it with a monitor.

    Rules from the USB-IF spec

    The rules here follow the USB Type-C specification and the USB-IF FAQ as they read in November 2026: speed logos, e-marker power limits, passive length limits, and the DisplayPort Alt Mode requirement. The USB-IF can revise the spec, so re-check its pages if a new cable standard appears.

    Frequently asked questions

    What do the markings on a USB-C cable actually mean?

    The markings are the cable's spec sheet. A speed logo — 5, 10, 20, 40 or 80 Gbps — says how fast it can move data. A wattage mark — 60 W or 240 W — says how much charging power it can carry. A Thunderbolt 3, 4 or 5 logo says it runs at 40 Gbps (Thunderbolt 5: 80 Gbps) and always carries video. A cable with no markings at all should be assumed to be USB 2.0: 480 Mbps, no video, about 60 W. The plug shape tells you nothing — every one of these cables looks identical.

    How do I tell if my USB-C cable supports video?

    Look for a USB4 logo (20, 40 or 80 Gbps) or a Thunderbolt logo — those always carry video. A plain USB 3.x speed logo (5, 10 or 20 Gbps) does not guarantee it: video needs a full-featured cable with the high-speed lanes wired for DisplayPort Alt Mode, so check for a DisplayPort logo on the cable or packaging. A cable with no speed logo cannot carry video at all. And remember the port matters too: the host device must support DisplayPort Alt Mode, USB4 or Thunderbolt, or no cable will show a picture.

    Can a USB-C cable charge my laptop at full speed?

    Only if its power rating is high enough. A cable without an e-marker chip is limited to 3 A — about 60 W at 20 V — so it will charge most laptops slowly, and some will drain while working hard. For full speed you need a cable marked 100 W or 240 W, which has an e-marker chip telling the charger it can carry 5 A. The 240 W mark also needs USB PD 3.1 Extended Power Range. Thunderbolt 4 cables are rated 100 W and Thunderbolt 5 cables 240 W. If your cable has no wattage mark, assume 60 W.

    Does cable length affect USB-C speed?

    Yes, for passive cables — the ones without signal chips in the plugs. Roughly: 40 or 80 Gbps needs 0.8 m or less, 20 Gbps about 1 m, 10 Gbps about 1 m, 5 Gbps about 2 m, and USB 2.0 about 4 m. A longer passive cable falls back to a lower speed. Active cables have chips that boost the signal and can beat these limits, which is why a 2 m Thunderbolt cable can still run at full speed. If your cable claims 40 Gbps but is 2 m long and cheap, it is probably not reaching 40 Gbps.

    Why does my 4K monitor show nothing over USB-C?

    Three usual causes, in order. First, the cable: an unmarked cable is USB 2.0 only and cannot carry video — use the checker above to see if your cable can. Second, the port: the laptop or monitor port must support DisplayPort Alt Mode, USB4 or Thunderbolt; a charging-only port will never show a picture. Third, the monitor input: make sure the monitor is set to the USB-C input and not HDMI. A dark screen with a cable that the checker says supports video usually means the port, not the cable.

    What is an e-marker chip, and why does it matter?

    An e-marker is a tiny chip inside the USB-C plug that tells the devices at both ends what the cable can do — its speed, its current rating and whether it supports video. Without one, a cable is limited to 3 A (about 60 W) and USB 2.0 speeds in the eyes of the charger and host. Every 100 W and 240 W cable has one, and so does every Thunderbolt cable. Cheap unmarked cables often skip it, which is why they charge slowly and never show a monitor. A web page cannot read the e-marker — only a device with a USB-C controller can — which is why this checker asks you to read the markings instead.

    Does this checker test my cable or upload anything?

    No. This checker is a self-assessment: it works only from the answers you pick, runs entirely in your browser with plain JavaScript, and nothing you enter leaves your device. It cannot test the cable itself — a web page has no way to read the cable's e-marker chip or measure a live link — so every answer you are unsure about is reported as something to confirm, and the result says so plainly. The only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the checker.