Does your video flash too fast? Find out before someone gets hurt.

Drop a video or animated GIF, or paste a colour sequence — get a WCAG 2.3.1 verdict, flashes per second, a per-second timeline and concrete fixes. Checked entirely on your device.

  • Your file data never leaves the device
  • Video, animated GIF + colour sequences
  • WCAG 2.3.1 general + red flash thresholds
  • Demo patterns — no file needed

Check a video or animated GIF

Drag & drop a video or animated GIF here

or browse your files · MP4, WebM, MOV up to 100 MB · GIF up to 20 MB

Analysed in your browser — video is sampled at up to 10 frames per second, GIFs are decoded frame by frame with their real delays. Nothing is uploaded.

No file handy? Try a demo pattern:
No file yet. Everything stays on this device. Reports download instantly.

Privacy you can verify, not just trust

Most online flash checkers either make you install desktop software, or send your video to their server for a paid cloud check. This one can't: your video or GIF is decoded and analysed entirely in your browser. Your file data never leaves the device — the only third-party requests are the site's own analytics, which count page views — and it uploads nothing, ever. There is no file fetched after load for the analysis itself. Don't take our word for it:

New cross-origin requests during use: 0
  1. Press F12 to open developer tools, then the Network tab.
  2. Check a video, GIF or colour sequence above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no file data ever leaves your device.
  3. Extra credit: disconnect your internet after this page loads — checking still works.

How to check flashing content without uploading it

Flashing content is the one accessibility failure that can send someone to hospital. Content that flashes more than three times a second, over a large enough area — especially in saturated red — can trigger a seizure in people with photosensitive epilepsy, and migraines or vertigo in many more. That is why WCAG makes it a Level A criterion, the most basic tier, with no exception for decorative intent.

This tool checks the risk where the file already is: on your own device. When you drop a video or GIF here, your browser:

  1. Decodes the file locally — video through the browser's own decoder, sampled at up to 10 frames per second; animated GIFs frame by frame with their real frame delays, using a small decoder built into this page.
  2. Measures every sampled frame — mean luminance, mean colour, and the fraction of the frame whose luminance changed by at least 10% since the previous frame. That fraction is the "area covered" the WCAG threshold turns on.
  3. Counts flashes the way WCAG defines them — a flash is a pair of opposing changes in luminance, so an 8 Hz strobe reports 8 flashes per second, not 16. Red flashes are counted separately, on the saturated-red and chromaticity test.
  4. Reports a verdict you can act on — PASS, CAUTION or FAIL, the worst one-second window, a per-second timeline, the worst moments with timestamps, and concrete fixes for exactly what failed.

What makes this checker different

The tool that tops the results for this search is a capable free video checker, but its free tier covers video files only — GIF checking sits in its paid cloud tier — and it needs a file before it can show you anything. The classic PEAT tool is a desktop download, and the newest live-page checker is a Chrome extension you have to install. This page is the only free, no-install, in-browser checker we found that covers all three things creators actually need to check: video files, animated GIFs (the most common flashing content on the web, and the format most likely to loop forever and autoplay), and pasted colour sequences for CSS animations and loading spinners — with instant demo patterns that show the verdicts working before you upload anything, and a live network-request counter so you can verify the privacy claim yourself.

When is checking the right choice — and when is it the wrong one?

Checking is right before you publish anything that moves fast: a video with strobe cuts, a reaction GIF, a loading spinner, a carousel, a banner ad, or a transition between high-contrast scenes. It is the wrong choice as a substitute for judgement: a clip can pass the numeric thresholds and still be unpleasant, and a clip that fails only in a small area still deserves a second look. It is also the wrong tool for broadcast certification — that needs the certified Harding test, not a web page.

Honest limitations

Screening, not certification

A PASS means no flashing risk was found in these frames at this sampling rate. It does not certify broadcast compliance and is not a legal sign-off.

Sampling can miss fast flashes

Video is sampled at up to 10 frames per second, so flashes faster than about 5 per second can be undercounted. The result states its sampling rate — read it.

No spatial-pattern detection

Stripes, checkerboards and other regular patterns can also provoke seizures, and this checker does not detect them. If your content has high-contrast repeating patterns, review it by eye.

Only the first 2 minutes

Long videos are analysed for their first 2 minutes only. Trim the clip to the flashing section and check that part if the risk is later in the video.

Area is approximated

WCAG's area test is 25% of 10 degrees of visual field at a typical viewing distance. This tool approximates it as 25% of the frame changing at once — a reasonable proxy, not an exact measurement.

It never changes your file

This tool only reports. Your original file is never modified — apply the fixes in your editor, export again, and re-check the new file here.

Frequently asked questions

Do my videos or GIFs upload anywhere?

No. Your files are decoded and analysed entirely in your browser — your file data never leaves the device, and the only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the checker.

What does WCAG 2.3.1 actually require?

Success Criterion 2.3.1 (Three Flashes or Below Threshold, Level A) says web pages must not contain anything that flashes more than three times in any one-second period, unless the flash is below the general flash and red flash thresholds. The general threshold is a pair of opposing changes in relative luminance of 10% or more where the darker image is below 0.80 relative luminance, over more than 25% of 10 degrees of visual field. The red threshold covers transitions to or from saturated red. This checker measures all three: rate, luminance change and area, plus red flashes.

How does the checker analyse my video?

Your browser decodes the video and samples it at up to 10 frames per second through a small canvas. For each sampled frame it records mean luminance, mean colour and the fraction of the frame whose luminance changed by at least 10% since the previous frame. Flashes are counted as non-overlapping pairs of opposing luminance changes, which is why an 8 Hz strobe reports 8 flashes per second. Animated GIFs are decoded frame by frame with their real frame delays, and pasted colour sequences are checked as full-frame colour changes.

Can this checker certify my video as safe for broadcast?

No — and no free web tool can. This is a screening check on the frames supplied, at the sampling rate stated in the result. It cannot certify broadcast compliance (the Ofcom Harding test or Japanese broadcast standards), it does not detect spatial patterns such as stripes or checkerboards, and flashes faster than half the sampling rate can be missed. A PASS here means no flashing risk was found in these frames at this sampling rate. For broadcast, use the certified Harding test; for web content, this check plus a manual review is the proportionate step.

Why does a GIF need its own check — is it not just a video?

GIFs loop forever, autoplay silently, and are the most common flashing content on the web — reaction GIFs, loading spinners and banner ads. The free tiers of video flash checkers generally cover video files only, with GIF support behind a paid or cloud tier, and the classic PEAT tool is a desktop download. This checker decodes GIF frames in your browser, honours each frame's real delay, and reports the flash rate a viewer actually sees, including the loop.

How do I check a CSS animation or a loading spinner?

Paste the colours the animation cycles through into the colour-sequence box, one hex colour per line, and set how long each colour is shown. The checker treats each colour as a full-frame change and reports the flash rate and verdict. For a page animation you cannot reduce to colours, record the page as a video (your operating system's screen recorder) and drop the recording here — the video check covers CSS animations, canvas effects, carousels and video alike.

My clip failed. What is the fastest fix?

Slow it below three flashes per second in any one-second window — hold each state for at least 0.34 seconds. If the flash involves saturated red, replace pure red with a muted red, orange or pink, or drop the red state entirely, because red flashes are judged on their own threshold. Reducing the contrast so the luminance swing is under 10%, or shrinking the flashing area below a quarter of the frame, also brings a clip under the thresholds. Then re-run the edited clip here: a fix that only slows a strobe from 8 to 4 flashes per second still fails.

Is there a file size or daily limit?

There is no daily limit and no account. Video files are capped at 100 MB and GIFs at 20 MB, because decoding in the browser is memory-heavy, and only the first 2 minutes of a video are analysed — the result says so if your clip is longer. Colour sequences have no size cap beyond a sensible paste length. If your video is longer than 2 minutes, trim it to the flashing section and check that part.

Why does this page never flash, even in the demos?

Because a flashing-content checker that flashes at its own visitors would be worse than useless. The demo patterns — a safe fade, an 8-per-second strobe and a saturated-red flash — are shown only as static colour chips, never as an animation, and the analysis runs on numbers, not on playing the pattern at you. The same rule applies to the timeline chart: it is a static bar chart.