Should you seal your driveway — or leave it alone?

Sealing a sound driveway at the right time can double its life — sealing a damaged one wastes the money, and sealing a healthy one buys almost nothing. The water test decides it in ten seconds: beads means leave it, soaks in means seal it. Answer nine questions and this checker gives you the verdict for your exact driveway, with a cost estimate — free, in your browser, nothing uploads.

  • Asphalt 2–3 years, concrete 3–5
  • The water test decides, not the calendar
  • Repair-first warnings built in
  • Free, no account, nothing uploads

Check your driveway

Try a preset:

Your result

Answer the questions Your verdict appears here as you answer.
Your driveway’s rule

Pick the driveway surface above and its rule will appear here.

Blockers

Fix first

Things to check

Still to confirm

What to do next

    Your result summary

    
              

    Answer the questions above — the verdict updates live.

    Privacy you can verify, not just trust

    Checking whether your driveway needs sealing by uploading photos of it to a website would be backwards — the check should never be the leak. This one can't: your answers are checked in your browser, and they never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Answer a question above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — the checker still works.

    How the driveway-sealing rule works

    There is no single answer to “should I seal my driveway” — the answer is written by the surface, when it was last sealed, what the water test shows, and what the cracks say, in that order. The shape is the same across every guide that ranks for this search: seal asphalt every 2 to 3 years and concrete every 3 to 5, reseal when water stops beading or the colour has faded to grey, and never seal a driveway that needs structural repair first. Sealing is maintenance for a sound surface, not repair for a damaged one: it fills the surface pores, blocks UV oxidation and keeps water out, and a well-sealed asphalt driveway lasts 20 to 30 years against 12 to 15 unsealed in a freeze-thaw climate. What ruins a driveway is water getting in: it freezes, expands about nine percent, and levers open whatever it got into, over and over from November into April. A surface that drinks water is on a short clock.

    To use it:

    1. Work out the surface. Asphalt is black and slightly flexible with a tarry feel; concrete is grey and rigid with visible joints; pavers are individual blocks with sand joints; gravel is loose stone with no solid surface. Asphalt seals every 2 to 3 years, concrete every 3 to 5, pavers optionally, gravel never.
    2. Check when it was last sealed. If you cannot remember, the water test decides. Sealing more than once every 3 years is counterproductive: the layers build up, crack and peel.
    3. Run the water test. Tip a bucket of water across the surface and watch it for ten seconds. On a sealed, sound driveway it beads and runs off. On a driveway that needs doing it goes dark and soaks straight in. Do the test at the bottom of the slope and again near the garage — a drive that beads at the top and drinks at the bottom still needs doing.
    4. Look at the cracks. Hairline surface checking is the surface drying out — sealing addresses it. Cracks wider than 1/4 inch need rubberised filler first, and the filler must cure for 24 hours before sealing. Potholes need proper patching with compacted patch material. Interconnected crocodile cracking is the base failing underneath: that is repair work, not sealing.
    5. Look at the colour and the grit. Still deep black including at the apron, water beading, no loose grit: leave it — a coat now buys you very little. Faded grey means the surface is drying out. If loose grit comes away, the binder has gone and the stone is no longer being held — that is raveling, and it is the stage where sealing still helps; wait another two winters and it is not.
    6. Check the climate. Freeze-thaw winters and heavy de-icing salt shorten the interval — seal at the short end, every 2 years for asphalt. In salt country, a surface that has opened up enough to take the chloride in holds it, and chloride works on the binder holding the stone together.
    7. Check the timing and the cost. Seal in late spring or early autumn, at 50 to 90°F with no rain for 24 to 48 hours after and no heavy traffic for 24 hours. For a standard 600 sq ft driveway, DIY materials run about $50 to $200 and a pro job about $200 to $600; one gallon of sealer covers about 80 sq ft per coat, and most homeowners run two coats.

    What makes this checker different

    The pages that rank for this search are guides and cost calculators — HomeMathLab, Meazora, AsphaPro and Akron Sealcoating explain the rules in prose, and AsphaltCalculator.shop, RevenueLab and ProPaving run the cost math from square footage alone. None of them answers the decision: should your driveway be sealed now, left alone, or repaired first? There is no free, standalone checker that takes your surface, age, last seal, water test, cracks, condition and climate into one verdict — seal it, leave it, or repair it first — with the blocker named, the filler and curing steps spelled out, and a DIY and professional cost estimate for your driveway's size. This page is that answer: nine questions, an instant verdict for your exact driveway, the fixes named, and the next steps. It is a self-assessment, so it says plainly what it cannot know: a driveway it cannot place by surface is reported as “can't tell”, not guessed — and a driveway whose water test has not been run is never condemned on the calendar alone, because the guides all agree the water test decides.

    When is this the right check?

    Every spring, once the salt has washed off and before the season opens — that is when a driveway tells you the truth about the winter it just had. When the surface has faded to grey or the water no longer beads, because those are the two signs the sealer is spent. When loose grit starts coming away, because that is the stage where sealing still helps. When a contractor offers to seal a driveway with crocodile cracking or sunken sections, because anyone who offers to seal that instead of repairing it is selling you a year. And whenever a guide gives you a flat “seal every two years” without asking what the water test shows: this page applies the rule for your driveway, and says so where the answer depends on a test it has not seen yet.

    Honest limitations

    A self-assessment, not a paving contractor's judgement

    This checker cannot walk your driveway. It cannot see whether water beads, how wide the cracks are, or whether the base is soft under load — so every seal-it verdict comes with the water test, and if the driveway fails any check while you work, a paving contractor should look at the base before sealing.

    The calendar never decides alone

    A driveway past its interval can still be fine if the water beads, and a young driveway can need sealing if the water soaks in. The guides all agree: the water test decides, and this checker follows them — it never says seal on age alone.

    Sealing is not repair

    Sealcoat hides structural damage for one season and then fails with it. Alligator cracking, sunken sections and a base that pumps water are structural problems: sealing over them postpones the repair conversation without addressing the underlying problem.

    Some driveways are genuinely too new

    New asphalt must cure for 6 to 12 months before its first seal — sealcoat over uncured asphalt traps oils and can peel. That is not a limitation of the checker — it is the verdict, and the checker says it plainly rather than offering a coat that will not hold.

    Costs are planning figures, not quotes

    The estimates here are 2026 ranges from the driveway guides — $0.15 to $0.35 per sq ft DIY for asphalt, $0.20 to $0.45 professionally, $0.50 to $1.00 for concrete. Quotes vary by region and by how much crack filling the job needs; get two local quotes before you commit.

    Rules from the guides, dated November 2026

    The rules here are the driveway guides' shared rules as they read in November 2026 — HomeMathLab, Meazora, AsphaPro, Akron Sealcoating, ProPaving and AsphaltCalculator.shop, with cost ranges from their 2026 pricing. Products and prices change: check the sealer's own instructions before you start.

    Frequently asked questions

    How often should I seal an asphalt driveway?

    Every 2 to 3 years for asphalt, and every 3 to 5 years for concrete — but the calendar is the wrong instinct in both directions. Run the water test each spring: tip a bucket of water on the surface; if it beads and runs off, the sealer is still working, and if it soaks in and darkens the surface, it is time to reseal. Sealing more than once every 3 years is counterproductive: the layers build up, crack and peel.

    How do I know if my driveway needs sealing?

    Run the water test: tip a bucket of water across the surface and watch it for ten seconds. On a sealed, sound driveway it beads and runs off; on one that needs doing it goes dark and soaks straight in. Do the test at the bottom of the slope and again near the garage. The other signs are the colour fading from black to grey, small surface cracks forming, and loose grit coming away — the binder going. If the driveway is still deep black, the water beads and there is no loose grit, leave it.

    Can I seal a new asphalt driveway?

    Not yet. New asphalt must cure before its first seal — 90 days minimum, ideally 6 to 12 months — because sealcoat over uncured asphalt traps oils and can peel. New concrete is different: seal it after 28 days of curing, once the surface is fully dry. Wait until a new asphalt driveway has had a full summer, then seal it.

    Should I seal over cracks in my driveway?

    Hairline surface cracks, yes — sealing addresses them. Cracks wider than 1/4 inch, no: fill them with rubberised crack filler first, let it cure for 24 hours, then seal. Potholes need proper patching with compacted patch material, not a surface skim. And alligator cracking — interconnected cracks like crocodile skin — means the base underneath has failed: that is repair work, not sealing, and if more than 30 percent of the driveway is alligator-cracked, resurfacing or replacement beats another round of sealcoat.

    What does it cost to seal a driveway?

    For a standard 600 sq ft two-car driveway, DIY materials run about $50 to $200 and a professional job about $200 to $600, depending on the region and how much crack filling the job needs. Per square foot, asphalt sealing runs about $0.15 to $0.35 DIY and $0.20 to $0.45 professionally; concrete sealing runs about $0.50 to $1.00 per sq ft professionally. One gallon of sealer covers about 80 sq ft per coat, and most homeowners run two coats. Crack filling is billed separately, about $0.50 to $3.00 per linear foot.

    When is the best time of year to seal a driveway?

    Late spring and early autumn, in most climates. The best sealing weather is 50 to 90°F (10 to 32°C) with no rain for 24 to 48 hours after application and no heavy traffic for 24 hours. Sealing over a dirty or damp surface is the most common DIY failure, followed by applying too thick a coat that skins over while wet underneath — both show up as peeling within the first winter. Clean the surface, let it dry fully, and apply two thin coats.

    Does this checker tell me for certain?

    No. This checker is a self-assessment: it runs your answers against the driveway guides' shared rules as they read in November 2026, entirely in your browser, and nothing you enter leaves your device. A web page cannot walk your driveway, so the verdict always comes with the water test — tip a bucket of water on the surface and watch whether it beads or soaks in. The only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the checker.