How the pressure-wash rule works
There is no single answer to “can I pressure wash this” — the answer is written by the surface, its condition, and the pressure, nozzle and distance, in that order. The shape is the same across every guide that ranks for this search: high pressure only for hard ground surfaces, soft wash or low pressure for the building envelope, and hand cleaning for glass and fixtures. Concrete is the main surface where pressure washing earns its keep — dense, hard and stable, it takes 1,500–3,000 PSI with a 25° or 40° nozzle without tearing or letting water travel into hidden areas. Everything else needs judgement: brick takes only 100–400 PSI with a wide fan, wood takes low pressure with a 40° nozzle kept moving, vinyl and fibre-cement siding want a soft wash, and stucco, asphalt shingles, painted wood and glass should not be pressure washed at all. The pressure is not the only variable — a 0° nozzle held six inches away concentrates the same machine into a cutting jet, and that is how most DIY damage happens.
To use it:
- Work out the surface. Concrete is a poured slab or blocks; brick is fired clay units set in mortar; vinyl siding is thin, flexible, overlapping plastic panels; stucco is a hard cement render; asphalt shingles are the granular, overlapping roof tiles. If you cannot tell what it is, the checker says so — a verdict without the surface would be a guess.
- Check the condition. Look for cracks, loose mortar, crumbling edges and peeling paint. Any of those means do not wash until it is repaired: pressure opens cracks wider, blows out loose mortar and strips paint that was already failing.
- Check the age. Fresh concrete and mortar need about 28 days to cure — pressure washing uncured work damages the surface and washes out the cement. Old surfaces are weaker than they look, so they get a test patch at the lowest pressure first.
- Pick the pressure. Under 1,500 PSI is the gentle end and the right choice for most surfaces; 2,500– 4,000 PSI is for sound concrete only; over 4,000 PSI is for sound concrete with a surface cleaner and nothing else. If your machine cannot turn down, a delicate surface is a no-wash.
- Pick the nozzle. A 25° or 40° fan nozzle is the safe default. A 0° or 15° tip concentrates the spray into a cutting jet that gouges wood, cuts mortar joints and strips paint. A turbo nozzle is for sound concrete and commercial flatwork, not for siding, wood or brick.
- Mind the distance. Hold the wand at least 12 inches away for wood and siding, 6–12 inches for concrete, and six feet for fibre-cement siding. Too close and the pressure doubles in effect — and never use a pressure washer while standing on a ladder.
- Check the hazards. Outlets, light fixtures and wiring nearby mean wash by hand with the power off. Paint on a pre-1978 house may be lead-based — test first, because pressure washing scatters lead chips into the soil and dust. Material that could contain asbestos must never be pressure washed at all.
What makes this checker different
The pages that rank for this search are guides — Angi, Miller Soft Wash, Home Exterior Lab and a dozen cleaning firms, each telling you the same rules in prose and leaving you to apply them to your own surface. There is no free, standalone checker that takes your surface, its condition and age, your pressure, nozzle and distance, and the hazards nearby, and gives you a verdict: safe, wash with care at low pressure, or do not wash — with the blocker named, the pressure corrected, and the test patch spelled out. The cost calculators that do exist answer a different question (what the job costs, or how much a pro charges), not whether your surface will survive the wash. This page is that answer: seven questions, an instant verdict for your exact surface, the fixes named, and the next steps. It is a self-assessment, so it says plainly what it cannot know: a surface it cannot identify is reported as “can't tell”, not guessed — and where the guides disagree, on vinyl siding, it says so instead of picking a side.
When is this the right check?
Before you rent or buy a pressure washer for a job you have not done before — run the checker first, because the surface and the pressure decide the answer together, and a roof or a stucco wall damaged by one afternoon's washing costs far more to fix than the wash saved. When the surface is vinyl, brick, wood or stucco, because those are the surfaces where the guides split and a flat “yes” is wrong. When there is mould or algae, because pressure alone does not kill it — the solution and the dwell time do the work. And whenever a guide gives you a flat “yes, you can pressure wash anything” without asking what surface it is: this page applies the rule for your surface, and says so where the answer depends on something it has not asked.
Honest limitations
A self-assessment, not a contractor's judgement
This checker cannot see your surface. It cannot feel whether the mortar is soft, tell soft brick from hard brick, or know whether paint is lead-based — so every wash verdict comes with a test patch, and if the surface marks while you work, stop.
The guides disagree about vinyl siding
Some guides call vinyl safe at low pressure with the stream kept level; others — including CertainTeed for its own siding — advise against power washing it at all, because pressure drives water behind the panels. This checker gives the honest middle — soft wash first — instead of pretending the guides agree.
Some surfaces are genuinely un-washable
Asphalt shingles, stucco, painted wood and glass will not take a pressure washer. That is not a limitation of the checker — it is the verdict, and the checker says it plainly rather than offering a lower pressure that will not save the job.
Pressure washers injure people
The US CPSC counted 6,057 emergency-room visits in 2017 tied to pressure washer injuries. Wear goggles, gloves and sturdy footwear, never point the wand at yourself or anyone else, and never use one while standing on a ladder — the recoil can throw you off.
Lead paint under old coatings
If the house was built before 1978 in the US, or the paint is pre-1980s, there may be lead paint underneath. Test first and follow local lead-safe rules — never pressure wash lead paint, which scatters chips into the soil and dust.
Rules from the guides, dated November 2026
The rules here are the manufacturers' and trade guides' shared rules as they read in November 2026 — Angi, Miller Soft Wash, Home Exterior Lab, the Brick Industry Association, James Hardie, the Vinyl Siding Institute, the Asphalt Roofing Manufacturers Association, Dryvit and the NSW Government asbestos guidance. Products change: check the surface maker's own care guide before you start.