How the damp check works
Damp in a house has four usual causes, and they need four different fixes — which is why guessing is expensive. Condensation is humid indoor air meeting a cold surface, and it is fixed by drying the air. Rising damp is groundwater coming up through the wall, and it needs a survey and a damp-proof course. Penetrating damp is rain getting in through a defect outside, and it is fixed outside, not inside. A plumbing leak is water escaping from a pipe, a tank or an appliance, and it needs stopping first. This checker scores your answers across all four — where the damp is, when it appears or gets worse, what it looks like, the result of a plastic sheet test if you have done one, the room humidity if you know it, and the age of the building — and names the most likely cause, how confident the reading is, and the first fix.
To use it:
- Say where the damp is. Low on a ground-floor wall, an upper wall or ceiling, around windows, in the basement, below a bathroom, or on an outside wall in patches. The location rules causes in and out: rising damp stays low, condensation sits on cold surfaces, a leak sits below a bathroom.
- Say when it appears or gets worse. After rain, on cold mornings, all the time, after showers and cooking, or worse in winter. Timing is the strongest clue: rain points outside, cold mornings point to condensation, all the time points to the ground or a pipe.
- Say what it looks like. A horizontal tide mark with white salts, a patch growing from one point, droplets or black speckled mould, one stain with a clear edge, or damp along the wall–floor joint. Each one is a fingerprint.
- Say whether you have done the plastic sheet test. Tape about 1 m² of clear plastic tightly over the patch, seal all four edges, and check after 24–48 hours. Moisture on the room side means humid indoor air; moisture behind the sheet means water is moving through the wall. It costs nothing, and it is the one check that separates the two fixes.
- Add the room humidity and the building age if you know them. A hygrometer reading over 60% can cause condensation on its own, and a house built before about 1920 may have no damp-proof course at all.
The four causes, and how to tell them apart
Condensation
Warm, moist indoor air meets a cold surface and leaves water there. Droplets or black speckled mould on windows, cold corners and behind furniture, worst on cold mornings and after showers or cooking. Fix: dry the air — ventilate, run extractor fans, keep humidity at 30–50%.
Rising damp
Groundwater moves up through porous brickwork. A horizontal tide mark low on a ground-floor wall, usually below about 1 m, often with white salts, peeling paint and crumbling plaster, there all year round. Fix: a professional survey and the damp-proof course — never just paint.
Penetrating damp
Rain gets in through a defect outside — cracked render, failed pointing, a blocked gutter, a roof fault. Patchy damp on outside walls or ceilings that follows rain and dries between showers. Fix: find the defect outside first, then let the wall dry for weeks.
A plumbing leak
Water escapes from a pipe, a joint, a tank or an appliance. One patch that grows from one point, often with a brown stain, on a ceiling or wall below a bathroom or kitchen, there whatever the weather. Fix: stop the water at the stopcock, check the meter, call a plumber.
What makes this checker different
The pages that rank for this search are guides — a damp surveyor's article that lists the three types of damp in a table, a waterproofing company's guide to basement moisture, a roofing company's page on condensation versus a roof leak. None of them asks where your damp is, when it appears, or what it looks like, and none of them gives you a verdict for your wall. There is no free, standalone checker that takes your location, timing, appearance, plastic sheet test result, humidity and building age, scores all four causes, and tells you the first fix and the test that would settle it. This page is that answer: six questions, an instant verdict with a confidence level, the blockers named, and the next steps. It is a self-assessment, so it says plainly what it cannot know: it cannot measure your walls, and where the cause is still unclear it says run the plastic sheet test instead of guessing.
When is this the right check?
When a damp patch appears and you do not know whether to call a plumber, a roofer, or a damp surveyor — because each one fixes a different cause, and calling the wrong one wastes the visit. When someone has told you it is rising damp and quoted for a damp-proof course — because the tide mark is only one clue, and sample analysis is the only reliable diagnosis. When the patch keeps coming back after you painted over it — because paint hides damp, it does not fix it. And when you rent and need to tell your landlord what is wrong — because a scored verdict with the first fix is a much stronger report than a photo of a stain.
Honest limitations
A self-assessment, not a survey
This checker cannot measure your walls, test your humidity, or see behind the plaster. It cannot check whether a damp-proof course exists, whether a pipe is leaking inside a wall, or how wet the masonry is. If the damp is growing, the plaster feels soft, or mould covers a large area, get a professional damp survey.
Two causes can sit together
A leak can sit underneath condensation, and high humidity can keep a wall damp even after the main cause is fixed. When the clues split, this checker says so — run the plastic sheet test and fix the water entry first, then the humidity.
Rising damp needs proof, not a guess
A tide mark with salts is the rising-damp fingerprint, but visual signs alone are not proof: University of Salford research found that sample analysis is the only reliable way to diagnose it. This checker can say rising damp is the most likely cause — it cannot confirm it.
The plastic sheet test takes a day
The test needs 24–48 hours taped to the wall, and it only tells you which side the water is on — not where it comes from. A result of moisture behind the sheet still leaves three causes on the table: the ground, the outside, or a pipe.
Humidity readings vary by spot
A hygrometer by the thermostat can read 45% while a cold corner reads much higher — condensation happens at the coldest surface, not at the room average. Measure beside the damp patch, not in the middle of the room.
Rules from official sources, dated November 2026
The rules here are the Natural Resources Canada plastic sheet test, the Health Canada indoor humidity range of 30–50%, the US EPA guidance on humidity below 60% and drying water-damaged areas within 24–48 hours, and the ASTM D4263 test, as they read in November 2026. Guidance changes: recheck with a professional if anything about your home changes.