How the warning-light rule works
Every dashboard warning light is designed to be triaged the same way, and the colour comes first: red means stop safely as soon as possible, amber or yellow means get it checked soon, and green or blue is information only. The shape then names the system — oil pressure, overheating, brakes, charging, engine management — and the way the car feels decides whether the light alone is the whole story. The rules in this checker come from the RAC, the AA, Kwik Fit and the DVSA MOT testing guidance, as they read in November 2026, and the shape is the same almost everywhere: a red light is a stop, an amber light is a booking, and a flashing light is a more urgent version of the same fault.
To use it:
- Pick the light. The rule is written light by light — the same red colour means something different on the oil can than on the airbag symbol, and the airbag light is the one red light that means service soon rather than pull over.
- Say what colour it is, and whether it is steady or flashing. Flashing beats steady: a flashing check engine light usually means an active misfire that can destroy the catalytic converter within minutes, while a steady one usually means a short drive to a garage.
- Say how the car feels. Rough running, a loss of power, an unusual noise or smell, a temperature gauge in the red, brakes that feel soft or long, or an engine that stalls all make the answer stricter than the light alone — a car that feels wrong is a stop, whatever the light says.
- Say whether another warning light is on too. Two lights together can change the meaning, and several lights at once usually mean a bigger fault.
- Say how far you need to go. A short drive to a garage is not the same as a long motorway journey — with some lights, the long journey is the thing the checker rules out.
- Say how long the light has been on. A light that came on this morning is a booking; a light that has been on for weeks is a garage visit now.
- Say whether you did the quick check. Each light has one roadside check — the fuel cap for the check engine light, the dipstick for the oil light, the handbrake for the brake light, the tyre pressures for the tyre light. If the light is still on after the check, the fault is real, not a loose cap or a low level.
Every light, and what it usually means
The table below is rendered from the same data the verdicts use, so the table and the checker can never disagree. Symbols follow the international standard ISO 2575, so most icons look the same across makes — but a make-specific lamp is possible, and your owner’s manual is the final word for your car.
What makes this checker different
The pages that rank for this search are guides — a garage’s engine-warning-light article, a dealer’s check-engine guide, a tow company’s urgency table — and the two interactive tools that do rank only identify the symbol: they tell you what the light is called, not whether you can keep driving with it on. There is no free, standalone checker that takes your light, its colour and behaviour, how the car feels and how far you need to go, and gives you a drive-or-stop verdict. This page is that answer: seven questions, an instant verdict for your light, the blockers named, the quick check spelled out, and the next steps. It is a self-assessment, so it says plainly what it cannot know: a web page cannot look under your bonnet or read your car’s computer, and a light the guidance gives as a range is reported with the range named, not collapsed to a single number.
When is this the right check?
When a light has just come on and you are deciding whether to keep driving or pull over — run the checker first, because the light, the colour and the way the car feels decide the answer together, and driving on with a red oil or temperature light can turn a cheap repair into a new engine. When the light has been on for days and you are wondering whether it can wait until the service — the checker tells you whether it can. When two lights are on at once — the checker counts the second light. And whenever a guide gives you a meaning without a verdict: the meaning is only half the question, and the verdict is the half that decides what you do next.
Honest limitations
A self-assessment, not mechanical advice
This checker cannot look under your bonnet, read your car’s computer, or hear how the engine sounds. Get a mechanic to look at the car before you rely on it, especially if the car feels wrong in any way.
Where sources disagree, the stricter answer wins
Some lights are given different urgency by different sources — the airbag light is red in colour but service soon in meaning. This checker uses the stricter reading and names the exception, instead of picking one silently.
The symptoms beat the light
Rough running, a loss of power, an unusual smell, a temperature gauge in the red, soft brakes or stalling make the verdict stricter than the light alone. If the car feels wrong, do not drive on hoping it clears.
Your owner’s manual is the final word
Symbols follow the international standard ISO 2575, so most icons look the same across makes — but a make-specific lamp is possible. If this checker’s light does not match yours, look it up in the manual.
An illuminated engine light fails the MOT
An illuminated engine management light is an automatic MOT failure under DVSA testing guidance, and an active check engine light fails a US state emissions inspection too. Fix it before the test, not after it.
Rules from published guidance, dated November 2026
The rules here are the published warning-light figures, checked against the RAC, the AA, Kwik Fit, DVSA MOT testing guidance and vehicle owner’s manuals in November 2026. Guidance changes: confirm the exact rule with a mechanic, and the exact MOT position with your tester, before you drive.