How to check whether your home Wi-Fi is secure
Home Wi-Fi security is a short list of settings, and the list is the same on almost every router: the encryption type, the router admin password, the Wi-Fi password, the firmware, WPS, the guest network, remote management, the connected-devices list, smart-home separation, the network name and the router’s age. This checker walks the list in order of importance — encryption and the admin password carry the most points because they decide whether anyone nearby can get in at all — and turns the answers into a 0–100 score with the fixes ranked. Three answers carry the whole verdict: if the encryption, the admin password or the Wi-Fi password is still unconfirmed, the checker says so instead of guessing.
To use it:
- Check the encryption. On Windows, click the Wi-Fi icon, then Properties under the connected network: the security type is listed there. On a Mac, hold Option and click the Wi-Fi icon. On a phone, open the network’s details page. WPA3 is the current standard; WPA2 with AES is the acceptable minimum. WEP, the original WPA and an open network are not safe.
- Check the admin password. Log in to the router settings — usually by typing 192.168.1.1 or 192.168.0.1 into a browser while connected to the Wi-Fi. If the password printed on the router’s sticker still works, it has not been changed. Change it to a long random one and save it in a password manager: it is separate from the Wi-Fi password.
- Check the Wi-Fi password. Use the estimator on this page: enter the length and the character mix — never the password itself. Under 50 bits of entropy is weak; 80 or more is strong. A passphrase of four or more unrelated words counts as strong too.
- Check the firmware. In the router settings, on the firmware or update page: install any update offered, and switch on automatic updates if the router offers them.
- Check WPS, the guest network and remote management. All three live in the router settings — WPS under wireless settings, the guest network under guest Wi-Fi, remote management under administration or advanced settings. WPS off, guest network on with its own password, remote management off.
- Check the devices. In the router settings, open the connected-devices list and compare it with the devices in your home. If you find one you do not recognise, change the Wi-Fi password — that is the fastest way to cut it off — then check the list again.
What makes this checker different
The pages that rank for this search are guides — thorough, but they explain the theory and leave you to work out what it means for the router in your hallway. The one interactive rival, a five-question scorer, gives every question the same 20 points and no per-fix guidance: a network with WEP encryption and a default admin password can still score 60 and read as “good”. This page does the job properly: eleven questions weighted by how much each one matters, critical failures that cap the verdict no matter what the rest says, a password-strength estimator that never asks for the password itself, and a ranked fix list with the exact setting to change. The install-app scanners do scan the network for real — but they need installing, an account, or a subscription. This one needs none of those, and says plainly what it cannot do: it is a self-assessment, not a scan.
When is this the right check?
When you move into a new home and inherit a router: run it before you trust the network with anything. When the broadband provider swaps the router: the new one ships with the same defaults the old one had. When a visitor has had the Wi-Fi password for a while, or a device you do not recognise shows up in the list: the checker tells you what to change and in what order. And every six months or so as a routine: firmware ages, devices join, and settings drift — a two-minute re-check catches it.
Honest limitations
A self-assessment, not a scan
This checker works only from the answers you enter. It cannot read the router settings, the encryption or the connected-devices list — no web page can. If an answer is wrong, the score is wrong. Confirm the settings in the router admin page before trusting the score.
A good score is not a guarantee
A strong score means the settings are right, not that the network can never be attacked. A device already on the network, a flaw in the router’s firmware, or a password shared too widely can still cause harm. Treat the score as a measure of the settings, not a promise.
The estimator guesses at randomness
The password estimator assumes the characters are random. A 16-character password made of a name and a date has far less entropy than the estimator credits it with, because attackers try names and dates first. Random characters or unrelated words are what the numbers assume.
WPA2 with AES is the floor, not the goal
WPA2 with AES is still acceptable in 2026, but only with a strong password. If the router offers WPA3, switch to it: it protects weak passwords far better than WPA2 does, and it is the standard new devices are built for.
Your provider may lock some settings
Some internet providers supply a router with locked settings — the admin password, the firmware or the guest network may not be changeable. Change what you can, and ask the provider about the rest: a locked router that cannot be updated is a reason to ask for a newer one, or to use your own.
Rules as they read in November 2026
The rules here follow the Wi-Fi Alliance’s encryption guidance and the home-network advice of the NCSC and CISA as they read in November 2026: WPA3 current, WPA2 with AES the minimum, WEP and the original WPA broken, WPS PIN weak, remote management off. Router makers can change defaults, so re-check the maker’s pages if a new model appears.