Can I iron this? Ask before you press it.

Pick your garment, its fabric, what the care label says and your iron setting — get an instant verdict, the reason, and the safe way to press it instead.

  • 28 garments covered
  • Instant, no sign-up
  • Free forever
  • Runs entirely in your browser

1. Find your garment

Try a preset, or search and tap a garment — then answer the three quick questions below it.

Safe — iron it Low heat only Do not iron Cannot tell yet

Privacy you can verify, not just trust

This checker asks you nothing and sends nothing: there is no form, no upload and no account — the verdicts are computed on your device from a table built into the page. The only requests to other sites are the site's own analytics, which count page views. Don't take our word for it:

External requests while checking: 0
  1. Press F12 to open developer tools, then the Network tab.
  2. Run any check above. Watch: apart from the site's analytics, nothing leaves your device — no data is sent anywhere.
  3. Extra credit: disconnect your internet after this page loads — the checker still works.

How to tell if something can be ironed

Two things do the damage under an iron: heat above the fibre's limit, and steam on a fabric that cannot take it. Cotton and linen shrug off the hottest setting; polyester, nylon and acrylic melt or glaze; silk scorches and water-marks; velvet's pile crushes flat. The fastest check is the one on the garment itself: the iron symbol on the care label, or the maker's instructions. When the maker has spoken, the maker wins — this checker follows the label wherever it exists, and refuses to guess when the label is missing on a risky fabric.

Read the care label: the iron symbols

Under the GINETEX / ISO 3758 care-label standard used worldwide, the ironing symbol is always an iron. One dot inside it means low heat — up to about 110°C — for nylon, acrylic, acetate, polyester and silk. Two dots mean medium heat — up to about 150°C — for wool, polyester blends and rayon. Three dots mean high heat — up to about 200°C — for cotton and linen. A cross through the iron means do not iron at all. Bosch and Siemens ironing guidance says the same thing in plainer words: iron low-temperature fabrics first, then medium, then high — and if the label disagrees with any guide, follow the label. The dots are a maximum, not a target: always iron at the lowest setting that gets the creases out.

The four questions that decide it

  1. What is it made of? Plain cotton and linen take the hottest iron. Wool, silk, rayon and cashmere take low or medium heat. Polyester, nylon and acrylic take low heat only — and velvet, leather, suede, vinyl and swimwear take none at all.
  2. Does it have a print, embroidery or finish? Prints, sequins, beads and waterproof membranes are the parts that fail first — often while the main fabric survives. Never put the iron directly on a print or on embroidery.
  3. What does the label say? A crossed-out iron bans ironing outright. A one-dot label caps the heat at low, whatever the fabric. No label on a risky fabric means no verdict — steam it or hang it up.
  4. What heat, steam and cloth are you using? The same garment can be safe on low and ruined on high. Steam marks silk and melts nylon; a pressing cloth protects almost everything. This checker downgrades the verdict when your chosen heat or steam is above the item's limit, and upgrades it when a cloth makes it safe.

Honest limitations

The label beats this checker

Makers change fabrics and finishes without notice. If your garment's label or manual disagrees with a verdict here, follow the label — it knows your exact garment.

Press, don't iron, wool and suits

Sliding the iron across wool stretches it and felts it. Lift the iron, place it, hold it, lift again — always through a damp cloth. The same goes for blazers and pleated skirts.

Heat damage is permanent

A shiny mark on polyester, a scorch on silk, a crushed patch on velvet — none of these come out. Start cooler than you think, test on a hidden spot, and turn the heat up one step at a time.

Not in the list? Don't guess

If your garment is not among the 28 covered here, the honest answer is to check the maker's label or manual. A wrong “safe” costs a blouse; a cautious steam costs nothing.

Every garment, at a glance

All 28 garments and 38 fabric variants covered by the checker, with the short verdict for a normal iron setting with the label allowing ironing.

GarmentVerdictWhy, in one line
Cotton shirt / blouse — Plain 100% cottonSafeCotton takes the hottest iron and loves steam.
Cotton shirt / blouse — Cotton-polyester blendLow heat onlyThe blend irons at the polyester setting, not the cotton one.
Cotton shirt / blouse — Printed graphic teeLow heat onlyHeat cracks and peels the print.
Linen shirt / trousers — Any linen garmentSafeLinen takes the hottest iron, best while damp with steam.
Silk blouse / dress — Any silkLow heat onlySilk scorches and water-marks; low heat, cloth, no steam.
Wool sweater / jumper — Ordinary woolLow heat onlyPress, do not slide — medium heat through a damp cloth.
Wool sweater / jumper — CashmereLow heat onlyCashmere felts if the iron is too hot; low heat through a cloth.
Polyester work shirt — PolyesterLow heat onlyToo hot leaves shiny marks or melts it; one dot is the ceiling.
Nylon jacket / windbreaker — NylonLow heat onlyNylon melts very easily; lowest heat, dry, with a cloth.
Acrylic knit jumper — Acrylic knitLow heat onlyHeat and steam stretch acrylic out of shape for good.
Velvet garment — Any velvetNeverAn iron crushes velvet’s pile flat; steam only, never press.
Leather / suede garment — Leather jacketNeverHeat dries leather out, cracks it and bakes creases in.
Leather / suede garment — Suede garmentNeverHeat mats the nap and stiffens the hide.
Sequin / beaded top — Sequins / beads / rhinestonesNeverHeat melts sequins and loosens the glue under beads.
Vinyl / PVC garment — Vinyl / PVCNeverVinyl is plastic: an iron melts it and sticks to the soleplate.
Iron-on / DTF print garment — Printed areaNeverAn iron melts the print adhesive and cracks the design.
Jeans (denim) — 100% cotton denimSafePlain cotton denim takes high heat well.
Jeans (denim) — Stretch denim (with elastane)Low heat onlyHot ironing makes stretch jeans go baggy for good.
Rayon / viscose dress — Rayon / viscoseLow heat onlyRayon turns shiny and shrinks if the iron is too hot.
Corduroy trousers / jacket — Any corduroyLow heat onlyA hot iron crushes the ribs; press on the reverse.
Wool blazer / suit — Wool blazer / suitLow heat onlyPress through a cloth; sliding stretches and felts wool.
Pleated skirt — Pleated skirtLow heat onlyPress each pleat in turn at medium heat to keep them sharp.
Chiffon / sheer blouse — Chiffon / sheerLow heat onlyThin and usually synthetic: low heat, dry, under a cloth.
Embroidered garment — EmbroideredLow heat onlyIron on the reverse so the stitching is not crushed flat.
Curtains — Cotton curtainsSafeCotton curtains take high heat and steam.
Curtains — Sheer / synthetic curtainsLow heat onlyHigh heat melts sheer synthetics and sets permanent creases.
Tablecloth — Cotton tableclothSafeA cotton tablecloth is just a big piece of cotton.
Tablecloth — Linen tableclothSafeLinen takes the hottest iron, best while damp.
Bed sheets — Cotton sheetsSafeCotton sheets take high heat and steam.
Bed sheets — Linen sheetsSafeLinen sheets take the hottest iron, best while damp.
Towels — Cotton towelsSafeCotton towels take any iron heat — though ironing flattens the pile.
Swimwear — Swimsuit / bikiniNeverHeat shrinks swimwear and destroys the stretch.
Socks and underwear — Cotton socks and underwearSafePlain cotton socks and underwear take any iron heat.
Socks and underwear — Synthetic socks and underwearLow heat onlyHeat degrades nylon and elastane, so the fit goes first.
Hoodie / sweatshirt — Cotton fleece hoodieSafeCotton fleece irons well at medium heat.
Hoodie / sweatshirt — Polyester fleece hoodieLow heat onlyHigh heat melts the pile, mats it and shrinks the hoodie.
Down jacket — Down-filled jacketNeverThe nylon shell melts and pressing crushes the down flat.
Waterproof / rain jacket — Membrane rain jacketNeverHeat delaminates the waterproof membrane for good.

Frequently asked questions

Can you iron polyester?

Yes, but only on low heat. Polyester starts to deform well below its melting point, so a setting that feels gentle on cotton leaves shiny marks or a melted patch on polyester. One dot — up to 110°C — is the ceiling, with little or no steam. Iron it inside out, under a pressing cloth, and keep the iron moving: you cannot un-melt polyester.

Can you iron silk?

Yes, with care — low heat, inside out, under a dry cotton pressing cloth, and no steam. Silk scorches, yellows and picks up shine marks fast, and water drops from steam leave permanent spots. A garment steamer held at a distance is safer than an iron for a silk blouse.

What do the dots on the iron symbol mean?

Under the GINETEX / ISO 3758 care-label standard, the iron symbol uses dots for the highest safe soleplate temperature: one dot means low heat, up to 110°C (nylon, acrylic, acetate, polyester, silk); two dots mean medium heat, up to 150°C (wool, polyester blends, rayon); three dots mean high heat, up to 200°C (cotton, linen). A cross through the iron means do not iron at all. The dots are a maximum, not a target — always iron at the lowest setting that works.

Can you iron velvet?

No. An iron crushes velvet’s pile flat and leaves permanent shiny patches — the one thing every ironing guide agrees on. Velvet is a steam-only fabric: steam it face down on a thick towel or a needle board, never press it, and brush the pile back up while it is warm.

What fabrics can't be ironed?

Leather and suede, vinyl and PVC, velvet, sequinned or beaded fabrics, swimwear, down jackets and waterproof membrane jackets should never be ironed. Silk, wool, cashmere, polyester, nylon, acrylic and rayon can be ironed, but only on low or medium heat and usually under a pressing cloth. When the care label is crossed out, the answer is always no — whatever the fabric.

Can I iron a garment that says “do not iron”?

No — the care label always wins. A crossed-out iron means the maker knows the fabric, finish or construction cannot take direct heat. You can often still steam the garment from a distance, or press the plain lining on low heat, but never put the iron on the garment itself. If the label is missing on a risky fabric, this checker says 'cannot tell' rather than guessing.

My care label is missing — can I still iron it?

Only with caution. For a plain cotton or linen item, low heat is a reasonable bet. For anything risky — silk, wool, velvet, sequins, leather, vinyl or an unknown blend — a missing label means you cannot tell, and this checker says so rather than guessing. Test on a hidden spot such as the inside hem first, start at the lowest setting, and use a pressing cloth. When in doubt, steam it or hang it up.