How to tell whether a pan works on induction
An induction hob does not heat the glass — it heats the pan. A coil under the glass produces a rapidly changing magnetic field, and that field induces currents in a ferromagnetic base, which turn into heat inside the pan itself. No magnetic base, no heat: the hob flashes an error or switches the zone off. That is why the question is never "is this a good pan?" — it is "is this pan magnetic, flat, and the right size for this ring?" This checker asks exactly that.
To use it:
- Identify the material. Cast iron, carbon steel and magnetic stainless steel work. Plain aluminium, copper, glass and ceramic do not — unless the maker bonded a magnetic layer into the base. Stainless steel depends on the grade: 18/0 is magnetic, 18/10 usually is not. Look for the induction coil symbol stamped on the base.
- Do the magnet test. Hold a fridge magnet against the outside of the base. A firm pull across the whole base usually means the pan works; no pull means it will not heat. Test the centre and the edges — a pan that pulls in the middle but not at the rim may heat unevenly.
- Check the base is flat. Put the pan on a worktop and press the rim: any rocking means the base is warped. A straight edge across the base shows a dome. A warped or round-bottomed base leaves a gap the field cannot cross well.
- Measure against the ring. Measure the flat part of the base and compare it with the ring marking printed on the glass — not the pan's overall width including handles and flare. Most hobs will not detect a base under about 12 cm.
- Consider an adapter disc — honestly. A steel disc under a non-magnetic pan lets it heat, but slowly and with poor low-heat control, and the disc stays dangerously hot after the hob switches off. It is a stopgap for one favourite pan, not a substitute for a proper induction pan.
- Try it with water first. Heat water in the pan at medium heat and watch that the whole base heats evenly. If the hob flashes an error, or the water heats in a ring, the pan is not a good match. Never heat a pan empty on full power.
Pan materials at a glance
The table below is built from the same rules as the checker, so it can never disagree with your verdict. Cast iron and magnetic stainless are the safe defaults; everything else needs a magnetic base, a flat base, or an adapter disc.
| Pan material or base | Verdict | What to know |
|---|
What makes this checker different
The pages that rank for this search are guides — thorough explanations of the magnet test and which materials work, but they leave you to work out what that means for the pan in your hand. There is no interactive tool that answers the actual question: can I use this pan on induction? This page is that answer: seven questions, an instant verdict, the reason named, and the blockers flagged before you buy or cook — with nothing to install, no account, and nothing uploaded. It is a self-assessment, so it says plainly what it cannot know: a web page cannot feel the pan or read the label, so anything you mark “Not sure” stays on the list until you confirm it.
When is this the right check?
Whenever you move to induction and wonder which of your old pans survive, whenever you are about to buy a pan and the listing does not say induction-ready, whenever a pan passes the magnet test but still will not heat, and whenever a pan heats unevenly or the hob flashes an error. Also whenever a pan has no induction symbol you can read, and whenever you are choosing between keeping a favourite pan with an adapter disc or replacing it.
Honest limitations
A self-assessment, not a test
This checker works only from the answers you enter. It cannot test the pan itself — no web page can feel a material or read a base marking. If an answer is wrong, the verdict is wrong. Confirm the material and the induction symbol before buying or cooking.
When in doubt, the answer is no
A pan that does not work simply will not heat — the hob switches the zone off. But a pan that heats badly can scorch food, buzz, and damage a non-stick coating in seconds. Where an answer matters and is not confirmed, this checker says "can't tell yet" rather than guessing it works.
The base marking is the final word
Every pan has its own maker and its own base marking, and it is the instruction for that product. If the maker has not labelled the pan induction-ready and the magnet slides off, do not trust a shop listing alone. The rules here follow induction hob makers' compatibility guidance as it reads in November 2026.
The magnet test screens magnetism, not flatness
A firm magnet pull says the base is magnetic — it says nothing about whether the base is flat, whether it is wide enough for the ring, or whether the coating can take the heat. That is why this checker asks about the base and the size too.
If the hob flashes an error, stop
An error code or a flashing pan icon means the hob cannot detect the pan. Switch the zone off, lift the pan, and check the magnet test and the base size again. Do not keep retrying on boost — a thin base overheats in seconds.
Rules from hob makers' guidance
The rules here follow induction hob makers' compatibility guidance — Bosch, Samsung, GE and Whirlpool induction manuals — and ENERGY STAR electric cooking guidance as they read in November 2026: the magnet test, the flat-base rule, the minimum-diameter rule, and the adapter-disc caveats. Makers can revise manuals, so re-check your hob manual if a new model appears.