Build campaign links GA4 reads correctly, the first time.

Paste a landing page, pick a preset, and get a clean UTM-tagged link — with a GA4 channel preview, bulk mode, CSV export and a decoder for links you already tagged. Built entirely on your device.

  • Nothing leaves your device
  • GA4 channel preview
  • Bulk mode + CSV export
  • All 9 GA4 parameters

Build your campaign link

Pick a preset to prefill source and medium, or type your own values below.

The page people should land on. Existing query strings and #fragments are kept.
Who sent the visit: google, facebook, newsletter.
The channel: cpc, email, social, referral.
The campaign or promotion name.
Paid keyword or audience segment.
Which creative, ad or call-to-action was clicked.
Your tagged link
Fill in the destination URL, source, medium and campaign to build your link.
    No link built yet. Everything stays on this device. The link updates as you type.
    Your saved presets live in this browser only — they never leave the device.

    Privacy you can verify, not just trust

    Most UTM builders are a form on someone else's server — and a campaign name is exactly the kind of thing you do not want logged. This one can't log anything: the link is built by plain JavaScript running in your browser. Your URLs and campaign names never leave the device — the only third-party requests are the site's own analytics, which count page views — and it uploads nothing, ever. There is no file fetched after load for the building itself. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Build any link above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no URL or campaign name ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — building still works.

    How to build a UTM link that GA4 reads correctly

    Every free UTM builder on the web does the same basic thing: you type five values and it appends them to a URL. The differences that matter are the ones that show up in your reports a month later — a campaign split into two rows because one link said "Google" and another said "google", a month of traffic sitting in "Unassigned" because the medium was "paid-social" instead of "cpc", or fifty links to tag by hand for one promotion. The builders that top the results for "utm link builder" each cover part of that — one has a GA4 channel preview but no bulk mode, another has bulk export but no channel check, a third handles Meta dynamic values but nothing else — and none of them combines the channel preview, bulk tagging with CSV export, a decoder for links already tagged, and all nine GA4 parameters in one page.

    This tool does exactly that. When you build a link here, your browser:

    1. Validates the destination — it must be a real http(s) URL, and any existing query string or #fragment is preserved.
    2. Cleans every value — lowercased, spaces replaced with your chosen separator, percent-encoded — except {{ }} dynamic values, which pass through untouched.
    3. Checks the trio — utm_source, utm_medium and utm_campaign are the three Google says to always use, and the builder warns you about any that are missing.
    4. Previews the GA4 channel — the default channel group (Organic Search, Paid Social, Email…) your source/medium pair will land in, before you publish the link.
    5. Warns about the traps — existing tags it replaced, uppercase it fixed, a value that looks like an email address, a pair that GA4 will report as Unassigned.

    What makes this builder different

    The pages that top the results for "utm link builder" — CommonNinja, MD Niamul, Orwel, Zynocode Labs, Astrafolio, Recatools, Kwebby, Convertica — are all solid single-link builders, and two of them do one advanced thing well: MD Niamul shows the GA4 channel, Convertica does bulk export, Madgicx handles Meta dynamic values. None of them does all three, none decodes a link you already tagged, and none covers the full nine-parameter GA4 set (utm_id, utm_source_platform, utm_creative_format, utm_marketing_tactic) alongside the classic five. This page is the only one we found that combines the channel preview, bulk mode with CSV export, a decoder, dynamic-value pass-through and all nine parameters, with no upload, no account and no limits, plus a live network-request counter so you can verify the privacy claim yourself. It runs entirely in your browser — there is no server to upload to.

    When is this the right tool?

    Whenever you publish a link outside your own site and want to know whether it worked: an ad campaign, a newsletter send, a social post, a partner link, a QR code on a poster. Tag it once, and GA4 tells you which of those actually sent visitors — and which sent visitors who stayed. For a big promotion, use the Bulk tab: paste the fifty landing pages, keep one campaign name, and download the CSV for the team.

    Honest limitations

    The channel preview is an approximation

    It applies GA4's documented default-channel rules to your source and medium. GA4's server-side rules also consult its own lists of search engines and social networks, so an unusual source can land differently — the preview tells you the rule it applied, so you can judge it.

    It cannot check your GA4 setup

    The builder makes a correct link; it cannot tell whether your GA4 property is actually receiving data, whether a filter strips the parameters, or whether your tag fires on the landing page. Check the Realtime report after the first click.

    Saved presets live in this browser

    Presets are stored in localStorage on this device. They do not sync to your other devices, and clearing site data removes them. Keep the campaign names in a shared doc for the team.

    Bulk mode shares one campaign

    All 500 rows share the same source, medium and campaign; only the URL, utm_term and utm_content vary per row. If each link needs its own campaign, build them one at a time on the Single tab.

    Shorteners can strip tags

    Most shorteners pass the query string through, but some do not — and some strip UTM parameters entirely. Test one shortened link in GA4's Realtime report before sending a campaign out.

    Dynamic values need the right platform

    {{campaign.name}} only works where Meta or Google replaces it. Pasted into an email or an organic post, the braces go out literally and GA4 records them as the value. Use plain text for anything that is not an ad platform.

    Frequently asked questions

    What are UTM parameters?

    UTM parameters are five (here nine) query tags added to a URL — utm_source, utm_medium, utm_campaign, utm_term and utm_content, plus utm_id, utm_source_platform, utm_creative_format and utm_marketing_tactic in GA4 — that tell analytics tools where a visit came from. When someone clicks the tagged link, Google Analytics reads the values and groups the visit under that source, medium and campaign. UTM stands for Urchin Tracking Module, after Urchin, the predecessor of Google Analytics.

    Which UTM parameters are required?

    Google's Analytics help page says to always use utm_source, utm_medium and utm_campaign. utm_term (the paid keyword) and utm_content (the ad or creative variant) are optional but recommended for paid search and A/B tests. This builder warns you when one of the three required values is missing, and it will not hide the warning — a link without them shows up as "(not set)" in GA4 reports.

    What is the GA4 channel preview?

    GA4 sorts every visit into a default channel group — Organic Search, Paid Search, Paid Social, Email, Referral, Display and others — using rules based on the utm_source and utm_medium values. The preview on this page applies those documented rules to your values and shows the channel GA4 will assign before you publish the link. If the pair matches no rule, the preview says Unassigned, which is how GA4 will report it too.

    Do my URLs or campaign names upload anywhere?

    No. The link is built entirely in your browser with plain JavaScript — your destination URLs and campaign names never leave the device, and the only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the builder.

    Should UTM values be lowercase?

    Yes — Google recommends lowercase because the values are case sensitive: GA4 treats utm_source=google and utm_source=Google as two different sources, which splits one campaign into two rows in your reports. This builder lowercases values by default and replaces spaces with underscores (you can switch to hyphens), so one campaign never fragments. The one exception is dynamic values in {{ }} braces, which are passed through untouched so Meta and Google can fill them in.

    Can I tag many URLs at once?

    Yes — switch to the Bulk tab, paste up to 500 URLs (one per line, optionally followed by a utm_term and utm_content separated by a tab or a comma), keep one shared source, medium and campaign, and the builder tags them all at once. You can copy all the tagged links or download them as a CSV with one row per link.

    What if my URL already has query parameters or a #fragment?

    They are kept. The builder preserves any existing query string and the #fragment, adds the UTM tags in the right place with the right separators, and puts the fragment after the tags. If the URL already carries UTM tags, they are replaced with the ones you set and the replacement is listed in the warnings, so nothing is silently overwritten.

    Can I use this for Meta Ads dynamic parameters?

    Yes. The Meta Ads preset fills in {{campaign.name}}, {{adset.name}} and {{ad.name}} as the campaign, term and content values. Values in double curly braces are never lowercased, never space-replaced and never percent-encoded, so Meta receives them exactly as written and fills them in when someone clicks. The same pass-through applies to any {{ }} value you type by hand, including Google Ads ValueTrack parameters.