Should you switch energy supplier — or stay put?

Enter your current tariff, your annual use and a real offer, and get an instant verdict — switch, stay, wait, or marginal — with the annual saving, the exit-fee test and the break-even if prices move. Five countries, no postcode, no sign-up. Entirely in your browser.

  • Instant verdict — switch, stay, wait, or marginal
  • Exit fee tested against the saving
  • Benchmarks dated November 2026, named sources
  • Free, no account, nothing uploads

Check your tariff

Try a preset:

Your result

Enter your numbers Your verdict appears here as you answer.
The tariffs, costed per year

Enter your current unit rate and your annual use, and your tariff will be costed here against the country benchmark — and against any offer you enter.

Blockers

Things to check

Still to confirm

What to do next

    Your result summary

    
              

    Enter your numbers above — the verdict updates live.

    Privacy you can verify, not just trust

    Checking whether to switch supplier by uploading your bill to a website would be backwards — the check should never be the leak. This one can't: your numbers are checked with plain JavaScript on your device, and they never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Enter a number above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — the checker still works.

    How to decide: switch energy supplier, or stay?

    Every comparison site will tell you switching saves money — because that is how they get paid. The honest question is narrower: does this specific offer, at your specific usage, beat your specific tariff, after the exit fee? This page answers that question in about a minute, for the UK, the US, Germany, Canada and Australia, without asking for your postcode or an email address.

    To use it:

    1. Pick your country and fuel. Benchmarks are per country: the UK uses the Ofgem price cap, the US uses the EIA average, Germany uses the BDEW average, and Canada and Australia use approximate national averages. Never one country's rules applied to another.
    2. Enter your current rates from your bill. The unit rate in pence or cents per kWh, the standing charge per day, and your annual use in kWh. All three are on your latest bill or in your supplier's app.
    3. Say whether you are on a fixed deal. If you are, enter the months left and the exit fee for leaving early — the checker tests the fee against the saving, and in the UK it applies the 49-day rule: no exit fee in the last 49 days of a fix.
    4. Enter a real offer, if you have one. The unit rate and standing charge from the offer in writing. Leave it blank and the checker compares you with the country benchmark instead — useful when you only know you are paying too much, not what to move to.
    5. Read the verdict, then the break-even. Switch means the offer saves at least 25 a year in your currency after the exit fee. Wait means the offer is good but the exit fee eats the first year. The break-even tells you how far your current rate would have to fall before the offer stops saving — that is the cushion on the bet.

    What makes this checker different

    The pages that rank for this search are mostly comparison sites that need your postcode and personal details before they show a price, and the dedicated calculators that do exist cover one country only — cost-saver.co.uk, clearrate.co.uk and monikit.co.uk for the UK, riratecheck.com for Rhode Island, and theday.company's checker for Texas. None of them gives an instant stay-or-switch verdict for five countries without a postcode or a sign-up, with the exit fee and a what-if-prices-move check built in. This page does — and it says plainly what it cannot know: benchmarks are national averages, your region may differ, and a real offer in writing beats any benchmark.

    When is this the right check?

    Whenever a fixed deal is ending, a supplier writes about a price rise, or a new offer lands in your inbox. It is also the right check before you sign anything a comparison site recommends: run the offer through it first, with the exit fee included. It is not the right tool for choosing between suppliers on service — a cheap supplier with terrible customer service can cost you more in time than it saves in money — and it cannot tell you what prices will do next; the break-even and the scenario check are the honest way to handle that uncertainty.

    Honest limitations

    A planning estimate, not advice

    This checker runs arithmetic on the figures you enter. It does not know your full finances or your contract's small print, and it cannot advise you. For a large or urgent decision, speak to a qualified adviser or, in the UK, Citizens Advice or MoneyHelper.

    Benchmarks are averages, not your rate

    The UK benchmark is the Ofgem cap average for Great Britain; the US figure is the EIA national average; Germany's is the BDEW household average; Canada and Australia are approximate national averages. Your region, payment method and meter type can move your real rate a long way from the average.

    US switching only changes the supply side

    In the US, delivery charges stay the same whoever supplies you, so only the supply (generation) rate is switchable. The EIA benchmark is an all-in average, so treat it as a rough guide — the precise check compares supply rates only.

    The 25-a-year line is a judgement call

    Switch is the verdict when the first-year saving clears 25 in your currency after the exit fee. That is a practical line, not a rule of economics — a smaller saving is still a saving, and a larger one can still be wrong if the new supplier's service is poor.

    Offers change; the page does not track them

    This page holds no live tariff data and no supplier quotes — it only checks the numbers you enter. An offer that was good last week may be gone today, so get it in writing before you switch.

    Rules dated November 2026

    The benchmarks follow the Ofgem price cap for 1 October to 31 December 2026, the EIA Short-Term Energy Outlook of October 2026, and the BDEW electricity price analysis of autumn 2026. Caps and averages change every quarter, so re-check the sources if you read this later.

    Frequently asked questions

    Should I switch energy supplier or stay where I am?

    Switch when a real offer beats your current tariff by a clear margin after the exit fee — this checker uses 25 a year in your currency as the line — and stay when it does not. A switch only saves money if the new unit rate and standing charge, at your actual usage, come out cheaper than what you pay now, including any fee for leaving early. Enter your current rates, your annual use and the offer above and the checker works it out; without an offer it compares you with your country's benchmark instead.

    How much can I save by switching energy supplier?

    It depends on how far above the benchmark your current rate sits and how much energy you use. A UK home on the Ofgem price cap (26.32p per kWh for electricity, 7.97p for gas, October to December 2026) using typical amounts pays about £1,723 a year; a fixed offer a few pence below the cap can save £100–£170 a year at that usage. A German home on the default Grundversorgung tariff at about 42 cents per kWh can save several hundred euros a year by moving to a new-customer tariff at about 23–25 cents. The checker shows your exact figure from your own rates — never a headline average.

    What is the Ofgem price cap and how does it affect switching?

    The Ofgem price cap limits the unit rates and standing charges suppliers in England, Scotland and Wales can charge households on standard variable (default) tariffs. For 1 October to 31 December 2026 it is equivalent to £1,723 a year for a typical dual-fuel household paying by Direct Debit — electricity 26.32p per kWh plus 54.83p a day, gas 7.97p per kWh plus 29.68p a day. The cap does not limit your total bill, which still depends on how much you use, and it does not apply to fixed tariffs. Fixed offers below the cap are the usual reason to switch; if the cap is forecast to fall, staying variable can win instead.

    Do I have to pay an exit fee to switch supplier?

    Only if you leave a fixed deal early. Standard variable tariffs have no exit fee. In the UK, suppliers cannot charge an exit fee in the last 49 days of a fixed deal, and you have 14 days to cancel a switch if you change your mind. This checker asks for the fee and the months left on your fix, and if the fee wipes out the first year's saving it tells you to wait and switch free instead. Always check the fee in your tariff terms before you switch.

    How long does switching take, and will my energy be cut off?

    In the UK a switch takes about five working days, and in the US, Germany, Canada and Australia the new supplier takes over billing without a visit in most cases. Your supply is never cut off by switching — the same wires and pipes deliver your energy, only the company billing you changes. Take a meter reading on the day of the switch so the final bill from your old supplier is exact.

    Should I fix my tariff or stay on the variable rate?

    Fix when the fixed rates on offer beat your variable rate by enough to matter and you value knowing exactly what you will pay — a fix protects you if prices rise. Stay variable when the fixes on offer cost more than your current rate, or when prices are forecast to fall: the January to March 2027 UK price cap is forecast at about £1,999 a year, up from £1,723, which is a forecast, not a price. The checker shows the break-even — how far your current rate would have to fall before the offer stops saving — so you can judge the bet yourself.

    Does this checker upload my bill or give financial advice?

    No to both. This checker is a planning estimate, not financial advice: it runs the arithmetic on the figures you enter — your unit rates, standing charges, usage and the offer in writing — and shows the trade-offs. It does not know your full finances, and for a large or urgent decision you should speak to a qualified adviser or, in the UK, Citizens Advice or MoneyHelper. Nothing you enter leaves your device: the check runs entirely in your browser, and the only third-party requests are the site's own analytics, which count page views. You can verify it with the network-request counter in the privacy section below the checker.