Reels Subtitle Timing Checker for captions that fit the phone.

Paste an SRT or VTT file — every cue is checked for timing, reading speed and line length, then previewed on a 9:16 phone with the Reels UI overlaid.

  • No uploads — verifiable
  • Free, no sign-up
  • Netflix, BBC & TED limits
  • 9:16 phone preview

Check subtitle timing for Reels

Add your subtitle file

Drag & drop an .srt or .vtt file here

or browse your files · you can also paste the file contents below

Check settings

32 characters per line fits a burned-in caption at readable size on a phone held at arm’s length.

Reels reserves the bottom ~480 px for the username, caption and action row.

How high your burned-in captions sit above the bottom edge. Below 480 px on Reels they slide under the username and caption block.

Preview overlays

In the home feed, Reels are cropped to 4:5 — the top and bottom of your 9:16 frame are cut off. Captions near the bottom edge disappear there.

Custom limits

Privacy you can verify, not just trust

Most subtitle tools upload your file to a server first. This one can't: your SRT or VTT is read and checked entirely in your browser. Your subtitle text is never sent anywhere — the only requests to other sites are the site's own analytics, which count page views. Don't take our word for it:

External requests during processing: 0
  1. Press F12 to open developer tools, then the Network tab.
  2. Check any subtitle file above. Watch: apart from the site's analytics, nothing is requested — no uploads, and no subtitle text ever leaves your device.
  3. Extra credit: disconnect your internet after this page loads — checking still works.

How to check Reels subtitles before you post

A caption that reads fine in your editor can fail on a phone: it flashes past too fast, wraps off the edge, or sits underneath the app's own buttons. Checking the file before you burn it in takes a minute and catches all three. This is what the checker measures, and why:

  1. Reading speed. Characters per second (CPS) is the number of characters in a cue divided by how long it stays on screen. The published ceilings are 20 CPS for adult English (Netflix), 17 for children's programmes, 21 for TED, and 160–180 words per minute for the BBC. Over the limit, most viewers cannot finish the line before it disappears.
  2. Line length and line count. TV subtitles allow 42 characters per line; a phone at arm's length fits about 32 at a readable burned-in size. More than two lines, and the third line is covered by the app's caption block on most phones.
  3. Time on screen. Netflix's guides set a minimum of 5/6 of a second (about 0.833 s) and a maximum of 7 seconds per cue. Shorter than that, the cue flashes; longer, and viewers re-read it while the next line is already due.
  4. Overlaps and gaps. A cue that starts before the previous one ends makes players drop one of them. A gap under two frames (about 67 ms) reads as a flicker.
  5. Placement on the phone. Reels, TikTok and Shorts all draw their interface over your video. The phone preview draws each cue where it would actually sit, with the platform's buttons, username block and the 4:5 feed crop shown — so a caption hidden by the interface is visible before you post, not after.

Published limits, side by side

StandardReading speedChars / lineLinesOn screen
Reels phone (9:16)20 CPS3220.83 – 7 s
Netflix — adult (English)20 CPS4220.83 – 7 s
Netflix — children17 CPS4220.83 – 7 s
BBC guidelines160–180 wpm3720.83 – 7 s
TED21 CPS4220.83 – 7 s

Limits are approximate references from the published guides, checked October 2026. Always follow the version your client sends — every limit in the tool is editable under Custom limits.

Instagram has no SRT upload — burn the captions in

Unlike YouTube, Instagram does not accept a caption file for Reels. Your options are Instagram's own auto-captions, or captions burned into the video before upload. The ASS export on this page is built for that workflow: a 1080×1920 frame with captions raised above the Reels caption block, ready for FFmpeg or your editor. Burn them in, then watch the export once on your phone before posting.

Honest limitations

Platform UIs change

The interface zones in the preview are careful estimates of how each app usually looks. The apps move buttons, change caption sizes and run experiments, so treat the preview as a guide and check the final export in the app.

It checks the file, not the words

Timing, overlaps, reading speed and line length are arithmetic on timestamps and character counts — they are provable. The checker cannot judge whether a translation is accurate, a joke landed, or a term was rendered correctly.

No transcription or audio sync

This tool checks a subtitle file you already have. It does not transcribe audio, and it cannot tell whether a cue is actually in sync with the spoken words — only whether its timing is internally consistent.

Auto-fix is a starting point

The fixed SRT re-wraps long lines and extends short durations where the next cue allows it. Read the result: a rewrap can split a phrase awkwardly, and an extended cue can step on the next line. The report lists every change it made.

Frequently asked questions

How do I check subtitle timing for a Reel before posting?

Paste your SRT or VTT file into this checker (or drop the file in). Every cue is measured against published limits — reading speed, characters per line, lines, time on screen, overlaps and gaps — and each problem comes back with its timecode and a suggested fix. Click any cue to see it on a 9:16 phone frame with the Reels interface overlaid, so you can see whether the caption would be covered by the username block or cut off in the 4:5 feed crop.

What reading speed should Reels captions stay under?

The widely used ceiling is 20 characters per second for adult English content (Netflix's published English guide), 17 for children's programmes, and 21 for TED. This checker defaults to 20 CPS and lets you switch to the Netflix children's, BBC (160–180 words per minute) or TED preset, or set your own limit. A cue over the limit flashes past before most viewers can finish reading it.

How many characters per line fit on a phone screen?

On a 9:16 phone, a burned-in caption at readable size fits about 32 characters per line — far fewer than the 42 characters Netflix allows for TV subtitles. This checker's Reels preset uses 32 characters per line and two lines maximum. If a line is longer, it will either wrap awkwardly or run off the edge of the phone screen, so the checker flags it and offers a rewrap.

Why do my Reels captions get covered by the app's buttons?

Reels draws its own interface on top of your video: the username, caption and action row occupy roughly the bottom 480 px of a 1080×1920 frame, and the like, comment and share rail sits down the right edge. Burned-in captions placed at the very bottom of the frame sit underneath that interface. Keep captions at least 480 px above the bottom edge (520 px is a safe margin) and inside the central column — the phone preview on this page shows exactly where the interface falls.

Instagram does not accept SRT uploads — how do I use my checked subtitles?

Instagram has no caption-file upload for Reels, so captions must be burned into the video itself (or use Instagram's auto-captions). After checking your file here, download the ASS export: it is a subtitle file formatted for a 1080×1920 frame with the captions raised above the Reels caption block, ready to burn in with FFmpeg or your editor. You can also download a fixed SRT or VTT with the checker's corrections applied.

Is my subtitle file uploaded anywhere?

No. Your subtitle file is read and checked entirely in your browser — the text never leaves your device. The only third-party requests are the site's own analytics, which count page views. You can verify this in your browser's Network tab while you check a file, or by watching the live request counter in the privacy section below.