Is your chimney safe to use — or does it need a sweep first?

A chimney that was swept this year, with a clean flue and a damper that opens fully, is ready for a fire. One with glazed creosote, a cracked liner or a stuck damper is not — and the difference is not visible from the living room. Answer ten questions and this checker gives you the verdict for your exact chimney — safe to light, book a sweep first, or do not light — free, in your browser, nothing uploads.

  • NFPA 211: inspected at least once a year
  • 1/8 inch of creosote means cleaning time
  • 23,000 chimney fires a year in the US
  • Free, no account, nothing uploads

Check your chimney

Try a preset:

Your result

Answer the questions Your verdict appears here as you answer.
Your chimney’s rule

Pick what the fireplace burns above and its rule will appear here.

Blockers

Fix first

Things to check

Still to confirm

What to do next

    Your result summary

    
              

    Answer the questions above — the verdict updates live.

    Privacy you can verify, not just trust

    Checking whether your chimney is safe by uploading photos of your home to a website would be backwards — the check should never be the leak. This one can't: your answers are checked in your browser, and they never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Answer a question above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — the checker still works.

    How the chimney safety rule works

    There is no single answer to “is my chimney safe to use” — the answer is written by the sweep date, the creosote, the damper and the liner, in that order. The shape is the same across every guide that ranks for this search: a chimney that was swept this year, with a clean flue and a damper that opens fully, is ready for a fire — and one with glazed creosote, a cracked liner or a stuck damper is not. The scale is real: the US Consumer Product Safety Commission puts the average at 23,000 chimney fires a year in the United States, with over 20 deaths, and most of them are caused by creosote build-up, blocked flues or deteriorated liners — all things a basic annual inspection catches. What ruins a chimney is not one bad fire: it is a year without a sweep, wet wood burned cool and slow, and a cap that lets rain and animals into the flue.

    To use it:

    1. Find the last sweep date. Check the sweep’s sticker, receipt or invoice — or the date on the last inspection report. NFPA 211 calls for an inspection at least once a year, however often the fireplace is used. If it has been more than a year, wait for that visit before you burn anything.
    2. Look up the flue with a flashlight. With the fireplace completely cold, open the damper all the way and shine a flashlight up the flue. Look for anything blocking the light — leaves, twigs, nest material and fallen debris are all reasons to stop and call a sweep. Look at the walls too: if you can scratch the dark coating with a pocketknife and it is about 1/8 inch thick, the chimney needs cleaning, and a shiny, glazed coating that looks like tar is more serious.
    3. Work the damper. Open and close it fully. It should move smoothly and stay open without propping or forcing, and close tightly when shut. A damper that is stiff, rusted or stuck closed is a reason to stop — a closed damper sends the smoke back into the room.
    4. Look at the cap from the ground. The cap should be there, level, and not rusted through. Without one, rain, snow, leaves and animals get straight into the flue — and a blocked flue can push carbon monoxide back into the home. You do not need to climb onto the roof to see it.
    5. Check the liner and the firebox. Shine the flashlight up the flue again and look for cracked tiles, gaps between them, and crumbling mortar. Look at the firebox too: cracked firebricks and missing mortar between bricks are the same warning in a different place.
    6. Think back to the last fire. Did the smoke go straight up, or did any of it come back into the room? A faint smoke smell at lighting is the early warning; smoke spilling into the room is the problem itself. And a loud roaring or cracking noise from the chimney is the sign of a chimney fire — if it is happening now, get everyone out and call the fire service.
    7. Test the alarms. Press the test button on every smoke alarm and carbon monoxide alarm in the house. Replace the batteries in any alarm that chirps, sounds weak or does not respond at all. A fireplace that draws poorly can push carbon monoxide back into the room, and you cannot see or smell it.

    What makes this checker different

    The pages that rank for this search are guides and checklists — a pre-season safety checklist, a fireplace safety guide, a chimney-fire emergency page, a local sweep’s safety information and a fire-damage buyer’s guide explain the annual inspection, the 1/8-inch creosote rule, the damper, the cap and the alarms in prose. None of them answers the decision: is your chimney safe to use? This page is the answer for your chimney: ten questions, an instant verdict for your exact chimney — safe to light, book a sweep first, or do not light — with the reason named, the sweep date, the creosote, the damper, the cap, the liner, the smoke, the carbon monoxide alarm and the fuel, and the next steps. It is a self-assessment, so it says plainly what it cannot know: a chimney whose flue has not been looked up is reported as “can’t tell”, not guessed — and a glazed flue or a cracked liner is never given the benefit of the doubt, because the guides all agree those are the gambles that cost the most.

    When is this the right check?

    When the first cold evening arrives and you are wondering whether the chimney is ready for the season’s first fire. When you move into a house with a fireplace you have never lit and want to know what to check before striking the match. When the last fire left a smoke smell in the room and you want to know whether that is a warning. When the sweep’s sticker says last year and you are deciding whether another year can wait. When someone in the house burned wet wood or treated offcuts and you want to know what that left behind. And whenever a guide gives you a flat “get it inspected once a year” without asking whether yours was: this page runs the checks for your chimney, and says so where the answer depends on a check it has not seen yet.

    Honest limitations

    A self-assessment, not a sweep’s judgement

    This checker cannot climb onto your roof. It cannot look up your flue, feel the creosote, or run a camera up the liner — so every verdict comes with the checks, and if the chimney ever smokes back, smells of tar, or roars, get everyone out and call the fire service.

    A sweep cannot fix a broken liner

    A cracked liner or crumbling masonry is a repair, not a cleaning. A sweep alone is not enough to rule out damage after a chimney fire, and no fire should be lit until a qualified professional has inspected it and given you a written report.

    Gas fireplaces are different, not exempt

    A gas fireplace makes no creosote, so the flue and fuel questions do not apply — but the venting, the liner and the carbon monoxide alarm matter just as much, because a blocked or corroded vent pushes carbon monoxide into the room.

    Wet wood is the creosote factory

    Creosote forms fastest when fires burn cool and slow, when wood is wet or unseasoned, or when the flue is oversized. Burning only dry, seasoned wood under 20 percent moisture, and keeping fires reasonably hot, is what slows it down between sweeps.

    The calendar is not the test

    An annual inspection is the rule, but a chimney can deteriorate whether you burn in it or not — animals nest in it, weather cracks the masonry, and the damper rusts. The sweep date matters, and so does looking up the flue yourself.

    Rules from the guides, dated November 2026

    The rules here are the chimney-safety guides’ shared rules as they read in November 2026 — NFPA 211, the Chimney Safety Institute of America, the US Fire Administration and UK fire-service guidance, via the guides that rank for this search. Guidance changes: check your own sweep’s report and run the flue checks before you decide.

    Frequently asked questions

    How do I know if my chimney is safe to use?

    Start with the last professional sweep: NFPA 211 calls for chimneys, fireplaces and vents to be inspected at least once a year, however often they are used. Then, with the fireplace completely cold, open the damper and shine a flashlight up the flue — look for creosote build-up, blockages and cracked liner tiles. Check that the damper opens fully and stays open, look at the cap from the ground, and test the smoke and carbon monoxide alarms. If the sweep is overdue, the flue is glazed, the liner is cracked, the damper is stuck, or smoke came back into the room last time, do not light a fire until a certified sweep has been.

    How often should a chimney be swept and inspected?

    At least once a year. NFPA 211, the standard for chimneys, fireplaces and venting systems, calls for an inspection at least once a year, and the US Fire Administration says the same for cleaning and inspection. That applies however often the fireplace is used — a chimney that sits unused for a season is more likely to have picked up bird nests, moisture damage and damper problems than one that was cleaned regularly. Book the sweep a few weeks before the first fire of the season, because sweeps fill up fast once the cold weather arrives.

    What does creosote look like, and when is it dangerous?

    Creosote is the sticky, flammable residue that builds up inside the flue every time wood smoke cools on its way out. The Chimney Safety Institute of America grades it in three degrees: degree 1 is light dusty deposits, degree 2 is flaky or tar-like build-up, and degree 3 is hardened glazed deposits that look like shiny tar and resist standard mechanical cleaning. The rule of thumb is that if you can scratch the dark coating with a pocketknife and it is about 1/8 inch thick, the chimney needs cleaning — and a shiny, glazed coating is more serious and calls for a sweep right away. A chimney fire burning creosote can exceed 2,000 degrees Fahrenheit and breach the liner.

    How do I check the damper?

    Make sure the fireplace is completely cold, then open the damper all the way. It should move smoothly and stay open without propping or forcing, and close tightly when shut. A damper that is stiff, rusted, stuck closed, or will not stay open is a reason to stop and call a sweep — a closed damper sends all the smoke and carbon monoxide back into the room. Open the damper fully before every fire, and leave it open for about ten minutes after the fire dies down.

    What does a chimney cap do, and what if mine is missing?

    The cap sits on top of the chimney and keeps rain, snow, leaves and animals out of the flue. Without one, water gets into the masonry — where freeze-thaw cycles widen cracks every winter — and birds and animals nest in the flue; sweeps regularly pull nests, squirrels and raccoons out of uncapped chimneys. A blocked flue can push carbon monoxide back into the home. Look at the top of the chimney from the ground: the cap should be there, level, and not rusted through. If it is missing, tilted or rusted, fit or replace it before the next fire, and have the sweep check the flue for nests first.

    Why is smoke coming back into the room?

    Smoke indoors means the flue is blocked, the damper is not opening fully, or the chimney is not drafting properly. Common causes are a bird nest or fallen debris in the flue, heavy creosote build-up, a stuck damper, or a cold flue that has not warmed up enough to draw. A fireplace that draws poorly can also push carbon monoxide back into the room, which you cannot see or smell. Do not light another fire until a professional has found the cause — a faint smoke smell at lighting is the early warning of the same problem.

    Do I need a carbon monoxide alarm with a fireplace?

    Yes. Carbon monoxide kills, and a blocked or poorly drawing chimney is one of the ways it gets into a home — a fireplace that draws poorly can push carbon monoxide back into the room, and you cannot see or smell it. Fit a carbon monoxide alarm in the room with the fireplace, press its test button every month, and replace the batteries if it chirps, sounds weak, or does not respond at all. A fireplace in a house with no working carbon monoxide alarm is a risk on its own, whatever the chimney looks like.

    Does this checker tell me for certain?

    No. This checker is a self-assessment: it runs your answers against the chimney-safety guides’ shared rules as they read in November 2026, entirely in your browser, and nothing you enter leaves your device. A web page cannot climb onto your roof or look up your flue, so the verdict always comes with the checks — the sweep date, the flashlight look up the flue, the damper, the cap from the ground — which take a few minutes. The only third-party requests are the site’s own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the checker.