How much flooring do you need — in boxes, and in dollars.

Enter every room, pick the flooring, and get the area, the waste, the boxes to buy and the total cost — with a per-room breakdown and a printable summary to take to the store. Free, in your browser.

  • Multi-room
  • Feet or metres
  • Boxes + cost
  • No uploads

Work out your flooring

Add every room you are flooring. Results update as you type — there is nothing to submit.

Rooms

Each type sets its own waste, box coverage and price defaults — change any of them below.
Diagonal and herringbone lays waste more material on cuts.
Default for laminate (straight lay): 10%. Move the slider to override it.
From the coverage printed on the box — commonly 17–24 sq ft for laminate, 18–30 sq ft for vinyl plank.
Typical US material prices: laminate $1–$5, vinyl $2–$5, tile $2–$8, hardwood $4–$12 per sq ft. Use your supplier quote.
Needed for laminate and most vinyl plank; usually not for glue-down hardwood or tile.
Leave blank for materials only. Installation is typically $2–$5 per sq ft in the US.
Your estimate
Enter room sizes to see your estimate. Everything stays on this device. Results update as you type.

Privacy you can verify, not just trust

Most flooring calculators are a form on someone else's server. This one can't log anything: every calculation runs in your browser with plain JavaScript. Your room sizes and prices never leave the device — the only third-party requests are the site's own analytics, which count page views — and it uploads nothing, ever. Don't take our word for it:

New cross-origin requests during use: 0
  1. Press F12 to open developer tools, then the Network tab.
  2. Change any room size above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no room size or price ever leaves your device.
  3. Extra credit: disconnect your internet after this page loads — calculating still works.

How to work out how much flooring you need

Every flooring calculator on the web does the same basic thing: you type a room size and it multiplies length by width, adds waste, and divides by the box coverage. The differences that matter are the ones that show up at the checkout — a second room forgotten, a diagonal lay priced as straight, a carpet order priced per square foot instead of per square yard, or a quote that forgets the underlayment. The pages that top the results for "flooring calculator" each cover part of that: TrowlCalc and CalcBuilt do one room well, EasyEstimate covers the UK in metres only, and Renovimo compares flooring types but prices one room at a time. None of them does multi-room totals with a per-room cost breakdown, feet and metres in the same job, all five flooring types with their own waste defaults, underlayment rolls, and a printable summary in one page.

This tool does exactly that. When you calculate here, your browser:

  1. Adds up every room — up to 20 rooms, each in feet, inches, metres or centimetres, mixed freely in one job.
  2. Applies the right waste — 10% for laminate, hardwood and vinyl on a straight lay, 15% for tile, plus 5% for a diagonal or herringbone lay — or your own figure from the slider.
  3. Rounds up to whole boxes — at the coverage printed on your box, because retailers sell sealed boxes only — and prices the boxes you actually buy.
  4. Handles carpet properly — converted to square yards and priced per square yard, not per square foot.
  5. Adds the extras — underlayment rolls at your roll size and price, and an optional labour rate, so the total is the whole job, not just the boards.

What makes this calculator different

The top results for "flooring calculator" — TrowlCalc, CalcBuilt, EntireCalc, EasyEstimate and Angi — are all solid single-room calculators, and Renovimo adds a good type comparison and labour band. None of them totals several rooms with a cost per room, none mixes imperial and metric rooms in one calculation, none prices carpet by the square yard alongside boxes for the other types, and none gives you a printable summary to take to the store. This page is the only one we found that combines multi-room totals, mixed units, five flooring types with per-type waste defaults, underlayment and labour, and a printable summary, with no upload, no account and no limits, plus a live network-request counter so you can verify the privacy claim yourself. It runs entirely in your browser — there is no server to upload to.

When is this the right tool?

Whenever you are pricing a flooring job before you order: a single room refresh, a whole flat, or a house where the bedrooms are carpet and the living areas are vinyl. Enter the rooms, set the coverage from the box you intend to buy, enter your supplier's price, and take the printed summary to the store — it shows the area, the boxes and the total, room by room, so a quote can be checked line by line.

Honest limitations

Waste figures are typical, not a standard

The 10% and 15% defaults are the figures flooring retailers and installers commonly quote. A room with many jogs, closets or a herringbone pattern can need more, and a very large simple rectangle can need less. The slider is there for that reason.

Rectangles only

Each room is entered as one rectangle. For an L-shaped room, split it into two rectangles and enter each part as its own room — the total is the same.

Prices are your quote, not a survey

The default prices are typical US ranges, not a price survey. Enter the figure from your supplier's current quote and the totals follow it.

It does not check your subfloor

The calculator cannot tell whether your subfloor is level, dry or sound, or whether a moisture barrier is needed on concrete. Those are separate checks before you order.

Trim and transitions are extra

Skirting, quarter round, transition strips and thresholds are not in the total. Measure the perimeter separately if you need them priced.

Estimates, not a quote

Results are estimates for planning. Confirm quantities against the coverage printed on the box and your supplier's quote before ordering.

Frequently asked questions

How much flooring do I need?

Multiply each room's length by its width to get the area, add a waste allowance, then divide by the coverage printed on the box and round up to whole boxes. For example, a 16 × 13 ft room is 208 sq ft; with 10% waste that is 229 sq ft, which is 12 boxes at 20 sq ft per box. This calculator does the same maths for every room at once and adds the rooms together.

How much waste should I add for flooring?

Add 10% for a straight lay in a simple rectangular room, and 15% for a diagonal or herringbone lay or a room with many closets and jogs. Tile starts at 15% because cuts and breakage run higher. These are the typical figures quoted by flooring retailers and installers; the waste slider on this page lets you change them, and you should confirm quantities with your supplier before ordering.

How many boxes of flooring do I need?

Divide the waste-inclusive area by the coverage printed on the box — commonly 17–24 sq ft for laminate and 18–30 sq ft for luxury vinyl plank — and round up, because retailers sell sealed boxes only. This calculator uses the coverage you enter, so set it from the box label rather than from memory.

How do I measure a room for flooring?

Measure wall to wall at the longest and widest points, in feet or metres, and enter each room separately — this calculator adds up to 20 rooms. For L-shaped rooms, split them into two rectangles and enter each part as its own room. Measure at floor level, not at the baseboard, and do not subtract doorways: the waste allowance covers the offcuts.

Does this calculator work in metres and square metres?

Yes. Each room's length and width can be entered in feet, inches, metres or centimetres, and you can switch the results between square feet and square metres. Carpet is the one exception: it is sold by the square yard, so the calculator converts to square yards (1 sq yd = 9 sq ft) and prices it per square yard.

How much does flooring cost per square foot?

Typical US material prices are about $1–$5 per sq ft for laminate, $2–$5 for vinyl plank, $2–$8 for tile and $4–$12 for hardwood, before labour, which is usually another $2–$5 per sq ft. Prices vary by region, brand and quality, so the defaults on this page are starting points — enter the figure from your own supplier quote and the totals follow it.

Do I need underlayment, and how much?

Laminate and most vinyl plank floors need underlayment for cushioning and moisture protection; glue-down hardwood and tile usually do not. Tick the underlayment box and this calculator works out the rolls from your total area — one roll covers 100 sq ft by default, which you can change to match the roll you are buying.

Is my room data uploaded anywhere?

No. Every calculation runs in your browser with plain JavaScript — your room sizes and prices never leave the device, and the only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the calculator.