How much ink will your document use?

Set the CMYK coverage per channel, pick a paper stock, and get total area coverage, ink volume, cartridge yield and cost per page — before you print. Entirely in your browser.

  • Per-channel CMYK sliders
  • TAC checked against the paper limit
  • Cartridge yield + cost per page
  • Free, no account, nothing uploads

Estimate your ink use

Try a document type:
8%
7%
6%
10%

Total area coverage: 31% of 400% (limit 320% for coated gloss / silk (offset))

0%100%200%300%400%
ml/m²

Your result

Pick your document Your verdict appears here as you answer.
The ink facts

Blockers

Things to check

Still to confirm

What to do next

    Your result summary

    
              

    Pick your document — the estimate updates live.

    Privacy you can verify, not just trust

    Estimating your ink use by uploading your document to a website would be backwards — the estimate should never be the leak. This one can't: you type in coverage figures (or pick a preset), the estimate runs with plain JavaScript on your device, and your figures never leave the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Pick a document type above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — the estimator still works.

    How to estimate CMYK ink coverage and cost

    Before you print a hundred brochures or a thousand flyers, two questions matter: will the paper take this much ink, and what will the ink cost? The pages that rank for this question today split into two camps. The professional tools (a printing ink calculator that measures every pixel of your uploaded file, a PDF ink coverage analyser) give exact measurements — but they ask you to upload your artwork, and they are built for prepress operators. The simple calculators (a bare ink coverage calculator with one coverage field) give you a number fast, but they ask for a single coverage percentage, so they cannot tell you whether your total area coverage is over the paper's limit, and they do not connect the coverage to what a cartridge actually costs you. This page is the middle ground: per-channel CMYK sliders, a total area coverage check against the paper stock's limit, and a cartridge-yield adjustment that turns the box yield into what you will really get — in one page, with nothing to upload.

    To use it:

    1. Pick a document type. Text only, text with light graphics, a business document, presentation slides, a photo-heavy brochure, or a full-bleed photo page. Each preset fills in the four CMYK channels from published coverage bands — the 5% ISO baseline for text, 7–12% for the average business document, 15–40% for documents with images.
    2. Adjust the channels if you know better. Drag the cyan, magenta, yellow and black sliders to match your document. The total area coverage meter updates as you drag — it is the four channels added together, from 0% to 400%.
    3. Set the page size and the number of pages. A4, US Letter, A3, A5, US Legal, or your own custom size. Bigger pages and longer runs use more ink, and the figures scale with both.
    4. Pick the paper stock. Coated gloss or silk (limit 320%), coated matte (300%), uncoated (260%), newsprint (240%), or a digital toner press (280%). If your total area coverage is over the limit, the estimator says so plainly and tells you how to fix it.
    5. Pick the print process and the laydown. Inkjet, laser toner or offset. The laydown is the ink film at 100% coverage of one channel — offset is about 1 ml/m², inkjet defaults to 10 ml/m², toner to 6 g/m². If you know your printer's real laydown, type it in.
    6. Enter your cartridge figures. The rated yield on the box (rated at 5% coverage) and what one cartridge costs. The estimator adjusts the yield to your coverage, then gives you cartridges needed, cost per page and total cost for the job.
    7. Read the verdict, then the facts. Light, typical, graphics-heavy or photo-heavy — with the ink volume per page and for the whole job, the adjusted yield, and the cost. Print one page first and check the real ink level before committing to the full run.

    What makes this estimator different

    The professional tools that rank for ink coverage measure your uploaded file pixel by pixel — exact, but they need your artwork and they are built for print shops. The simple calculators that rank nearby take one coverage number and return one cost number — quick, but they cannot check total area coverage against a paper limit, and they do not show you which channel is doing the work. This page does all three in one place: per-channel CMYK coverage with a live total area coverage meter checked against five paper stocks, ink volume from a laydown you can change, and cartridge yield adjusted from the 5% ISO baseline to your real coverage with cost per page — and it says plainly where every figure comes from: ISO/IEC 19752 / 19798, Buyers Laboratory, and the published total area coverage limits — all as published in November 2026.

    When is this the right check?

    Whenever you are about to print a run and want to know what it will cost before the ink is gone — a brochure run, a flyer drop, a photo book, a stack of presentation handouts, or a home-office document you print every week. It is also the right check before you send artwork to a printer and want to know whether the darkest areas are over the paper's ink limit, and before you buy a cartridge and want to know how many pages it will really last. It is not a measurement of a real file: for a firm figure on a finished PDF, measure the file in a prepress tool.

    Honest limitations

    An estimate, not a measurement

    This page estimates from the coverage figures you enter. It never sees your document, so it cannot measure it. The presets are published bands — the 5% ISO baseline, the 7–12% business-document band, the 15–40% graphics band — not your pages. For a firm figure, measure the real file or print a test page.

    The laydown is a starting point

    The ink volume comes from the laydown — the ink film at 100% coverage of one channel. Offset is about 1 ml/m² from first principles, but inkjet and toner laydowns vary by printer, settings and paper. If you know your printer's real laydown, type it in — the figures update at once. Draft mode roughly halves it.

    Cartridge yields are rated at 5%

    The yield on the box is rated at 5% page coverage under ISO/IEC 19752 / 19798. The estimator adjusts it to your coverage with the standard inverse rule (adjusted yield = rated yield × 5 ÷ your coverage), which is how the ranking calculators do it — but printers also use ink on cleaning cycles, so treat the adjusted yield as an upper bound, not a promise.

    Paper limits vary by press

    The total area coverage limits on this page (coated 300–320%, uncoated 260%, newsprint 240%, toner press 280%) are the published rules of thumb. Your printer's own limit always wins — ask for it before a big run, and re-check if you darken anything after estimating.

    Coverage is an average, not a peak

    The channel percentages are averages across the whole page, including blank space — the same basis the ISO yield tests use. A page can have a small patch that is far darker than the average, and that patch is what sets off or blocks. The TAC check is a page-level guard, not a spot check.

    Figures dated November 2026

    The figures quoted here are as published in November 2026: ISO/IEC 19752 / 19798 (5% cartridge-yield baseline), Buyers Laboratory (average business document 7–12%, images/graphics 15–40%), and total area coverage limits (coated 300–320%, uncoated 260%, newsprint 240%, toner press 280%). Standards and printer figures change slowly, but re-check them if you read this much later.

    Frequently asked questions

    What is CMYK ink coverage?

    CMYK ink coverage is the share of a page's area covered by each of the four process inks — cyan, magenta, yellow and key (black) — expressed as a percentage per channel. A plain text page is about 5% black and near 0% for the other three channels, because that is the ISO test-page baseline. A photo-heavy page can be 40% or more per channel. Add the four channels together and you get total area coverage (TAC), which runs from 0% to 400%.

    What is a good ink coverage percentage?

    It depends on the document. Printer cartridge yields are rated at a standardised 5% page coverage under ISO/IEC 19752 (monochrome) and ISO/IEC 19798 (colour) — roughly a typical text-only letter. Independent testing by Buyers Laboratory puts the average business document at 7–12% coverage, and documents with images or graphics commonly reach 15–40%. There is no single good number: light text pages are cheap to print, photo pages cost several times more per page, and the estimator shows you which band your document sits in.

    What is total area coverage (TAC) and what is the safe limit?

    Total area coverage (TAC), also called total ink limit, is the four CMYK channel percentages added together, so it runs from 0% to 400%. It is the number a press operator checks against the paper's limit: coated gloss or silk offset paper is commonly held near 320%, coated matte near 300%, uncoated offset near 260%, newsprint near 240%, and a digital toner press near 280%. Past the limit, the paper cannot absorb the ink cleanly — it sets off onto the next sheet, dries slowly and blocks in the stack. The estimator checks your TAC against the limit for the paper stock you pick.

    How much ink does one page use?

    It depends on the coverage, the page size and the print process. The estimator multiplies the page area by the total area coverage and by the laydown — the ink film the process puts down at 100% coverage of one channel. An A4 text page at 5% black uses about 0.03 ml on an inkjet; the same page as a full-bleed photo can use close to 1 ml. The laydown is a starting point you can change: offset is about 1 ml/m² (a one-micron film over a square metre is 1 ml), inkjet defaults to 10 ml/m² and laser toner to 6 g/m².

    How do I work out the cost per page from my cartridge?

    Take the cartridge's rated yield — the number of pages on the box, rated at 5% coverage — and adjust it to your coverage: adjusted yield = rated yield × (5 ÷ your average coverage). Then cost per page = cartridge price ÷ adjusted yield, and cartridges needed = pages ÷ adjusted yield, rounded up. A cartridge rated for 2,000 pages costs about $0.02 a page at 5% coverage, but about $0.17 a page at 37% average coverage, because the yield drops to roughly 270 pages. The estimator does all of this from the cartridge price and rated yield you type in.

    Why does my cartridge run out faster than the box promises?

    Because the box yield is rated at 5% page coverage under ISO/IEC 19752 / 19798 — a plain text letter. Real documents almost always exceed it: independent testing puts the average business document at 7–12% coverage, and documents with images or graphics commonly reach 15–40%. At 20% average coverage a cartridge rated for 2,000 pages manages about 500 pages, so it empties four times faster than the box suggests. Printers also use ink on cleaning cycles, which the rated yield does not count.

    Does this estimator upload my document?

    No — it never sees your document at all. You type in coverage figures (or pick a preset), and the estimate runs entirely in your browser with plain JavaScript, so your figures never leave your device — the only third-party requests are the site's own analytics, which count page views. You can verify it with the network-request counter in the privacy section below the estimator. It is an estimate from the figures you enter, not a measurement of a real file.