How to tell whether an appliance can go on an extension cord
Some appliances must never meet an extension cord — a space heater, a kettle, a tumble dryer, a fridge. Others are fine on any sound cord — a TV, a lamp, a phone charger. And a third group sits in between — a vacuum cleaner or a power tool that can run on a cord, but only a short, heavy-duty one. That is why the question is never just “how many watts?” — it is “which appliance, in which country, on which cord, with what else on it, run how, in what shape, and for how long?” This checker asks exactly that.
To use it:
- Identify the appliance. Space heaters, kettles, tumble dryers, fridges, washing machines, dishwashers, microwaves, air fryers, hair dryers, irons, ovens and window air conditioners must plug directly into a wall outlet — their makers say so, and the US Consumer Product Safety Commission says so for space heaters. Vacuum cleaners and power tools can run on a cord, but only a short, heavy-duty one. TVs, computers, lamps, chargers and fans are low-draw and fine on any sound cord within its rating.
- Say which country you are in. The same cord handles very different watts at 120 volts (USA, Canada) and 230 volts (UK, EU, Australia). A 15-amp cord is 1,800 watts in the US and 3,450 watts in the UK — so a cord that is fine for a kettle in London can melt under one in New York.
- Read the cord's label. The label states the amps (A) and volts (V). Amps times volts is the limit: a US 15-amp cord at 120 volts handles 1,800 watts, a UK 13-amp lead about 3,000 watts, an EU 16-amp lead about 3,680 watts, and an Australian 10-amp lead about 2,300 watts. A thin indoor cord with no label is not a safe guess — the checker treats it as 7 amps.
- Add up everything on the cord. The limit is the total load, not one appliance. A TV and a laptop together are fine; a TV and a space heater on the same cord are not. A continuous load should stay under 80% of the rating — a 1,800-watt cord should carry no more than 1,440 watts for hours at a time.
- Say how the cord is run. One cord, straight into a wall outlet, is the only safe setup. Daisy-chaining one cord into another adds a joint at every connection, and every joint adds resistance, which makes heat under load. A cable reel still wound up concentrates heat in one spot. A cord under a rug or through a doorway gets damaged where nobody can see it. An indoor cord used outside meets rain it was never built for.
- Check the cord's condition and how long it will run. A frayed, cracked or warm cord must not be used at all. And an extension cord is for temporary use only — the National Electrical Code (Article 400) says flexible cords are not a substitute for permanent wiring. If a cord has been plugged in for weeks or months, the fix is another outlet, fitted by a qualified electrician.
Appliance, cord and what to do at a glance
The table below is built from the same rules as the checker, so it can never disagree with your verdict. Heaters, kettles, dryers, fridges and other high-draw appliances never go on a cord; vacuums and power tools need a short, heavy-duty one; TVs, lamps and chargers are safe on any sound cord within its rating.
| Appliance or situation | Verdict | What to know |
|---|
What makes this checker different
The pages that rank for this search are guides — thorough articles about one appliance at a time, usually the space heater, that leave you to do the watts arithmetic yourself and never ask what country you are in, what else is on the cord, or how the cord is run. The nearest calculators are a generator gauge calculator, which sizes a cord for a generator, and a UK-only socket overload calculator, which covers one country's sockets and nothing else. There is no free web checker that answers the actual question: can this appliance, in this country, go on this cord, with this much else on it, run this way — or does it need a wall outlet? This page is that answer: seven questions, an instant verdict, the watts worked out, and the blockers flagged before anything is plugged in — with nothing to install, no account, and nothing uploaded. It is a self-assessment, so it says plainly what it cannot know: a web page cannot see your cord, so anything you mark “Not sure” stays on the list until you confirm it. The dryer outlet checker on this site answers a different question — whether a dryer can plug into a regular wall outlet — while this one answers whether anything at all can go on a cord.
When is this the right check?
Whenever you are standing in a room with an appliance in one hand and a cord in the other: the space heater in a cold bedroom, the kettle on the far side of the kitchen, the TV in a room with one outlet, the vacuum cleaner at the end of a long hall, the power tool in the garden, or the phone charger by a bed with no socket nearby. Also whenever you move into a new home — check the cords that came with it before trusting them — and whenever a plug feels warm, a cord looks frayed, or a breaker trips: the answer is already no, and the checker will say so.
Honest limitations
A self-assessment, not an inspection
This checker works only from the answers you enter. It cannot see your home, test your cord, or know what your appliance really draws. If an answer is wrong, the verdict is wrong. When in doubt, plug it directly into a wall outlet.
Typical watts, not your watts
The watts used here are typical values: a kettle can be 1,500 or 3,000 watts, a hair dryer 1,500 or 1,875. Your appliance's own nameplate is the true figure — if it states amps instead of watts, multiply by your voltage (120 V in the US, 230 V in the UK and EU) to get the watts.
The 80% rule
A continuous load should stay under 80% of a cord's rating: a 1,800-watt cord should carry no more than 1,440 watts for hours at a time. A cord running above 80% will feel warm — and a warm cord is a warning, not a nuisance.
Heaters are the exception that proves the rule
A space heater alone at 1,500 watts already fills a standard 15-amp US cord, and the CPSC counted about 1,700 fires a year involving portable heaters from 2017 through 2019. There is no safe cord for a space heater — only a wall outlet.
Temporary use only
Extension cords are for temporary use: the National Electrical Code (Article 400) says flexible cords are not a substitute for permanent wiring, and they must not run through walls, ceilings, floors, doorways or windows. A cord that has been plugged in for months is a wiring job waiting to happen.
Rules from safety authorities
The rules here follow the US Consumer Product Safety Commission, the National Fire Protection Association, Electrical Safety First and the National Electrical Code, as they read in November 2026. Authorities can revise guidance, so re-check if a new edition appears.