Someone sent you an Audacity project. Open it here — no install.

Drop an .aup3, .aup4 or legacy .aup file and see the whole project: tracks, clips, labels, sample rate and duration — then play the mix or export the track list. Your file never leaves this device.

  • Real .aup3 reader — SQLite + sample blocks
  • Tracks, clips & labels inventoried
  • Play the mix · export CSV, JSON, WAV
  • Free, no account, nothing uploads

Open your Audacity project

Drop your project file here

.aup3 · .aup4 · .aup — or, for a legacy .aup, drop its _data folder too so the audio can be found

Or — a small two-track .aup3 built for this page.

No project loaded yet. Your file is read on this device only — nothing uploads.

Privacy you can verify, not just trust

Opening a project by uploading it to a website would be backwards — the inspection should never be the leak. This one can't: your project is opened with sql.js and plain JavaScript on your device, and it never leaves the device — the only third-party requests are the site's own analytics, which count page views. Don't take our word for it:

New cross-origin requests during use: 0
  1. Press F12 to open developer tools, then the Network tab.
  2. Drop a project file above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no data ever leaves your device.
  3. Extra credit: disconnect your internet after this page loads — opening a project you already have still works.

How to open an Audacity project without Audacity

Audacity's own manual says a saved project can only be opened by Audacity — which is exactly the problem when a podcast co-host, a band member or a client sends you a project and your machine cannot install software. This page reads the project file itself, in your browser, and shows you what is inside.

To use it:

  1. Drop the project file — an .aup3 (Audacity 3), .aup4 (Audacity 4) or a legacy .aup — onto the box above, or use the Choose a file button. For a legacy .aup, also drop its _data folder (Choose a _data folder), because the audio lives in the folder's .au files, not in the .aup itself.
  2. Read the inventory. Every track is listed with its clips, start and end times, sample rate, gain, pan and muted or solo state, plus the label tracks and a waveform drawn from the project's own audio.
  3. Listen or export. Play the rebuilt mix, download it as a WAV, or take the track list as CSV or JSON and the labels as a text file Audacity can import back.

What makes this opener different

The other ways to hear a project without Audacity each have a catch. Waveward, the dedicated browser opener launched in late 2026, plays the mix and exports WAV or MP3 free only up to 256 MB, with a $19 Pro upgrade for larger projects, per-track stems and splitting at labels. Upload converters such as 101convert's AUP3 to MP3 page send your project to their server and give you back a single audio file — no track list, no labels, no structure. And the Audacity manual and forum answers all end at the same place: install Audacity. This page is the free, unlimited alternative: no size cap beyond your browser's memory, no account, no upload, and the full inventory — tracks, clips and labels — with CSV, JSON, labels-text and WAV exports, plus legacy .aup files with their _data folders.

When is this the right tool?

Whenever a project arrives and Audacity is not an option: a work laptop that forbids installs, a Chromebook, a quick check of what a collaborator actually sent before you open it in Audacity, or an archive folder full of old .aup projects you want to catalogue without installing anything. It is also the fast way to answer the small questions — how long is it, how many tracks, where are the labels — without launching a full editor.

Honest limitations

Effects are not rendered

Playback rebuilds the mix from the raw sample blocks with track gain and pan only. Effects, volume envelopes and track automation are not applied — you hear the project with effects bypassed, not the finished mix.

The -wal file is not applied

If Audacity was still open when the project was copied, the newest edits live in the -wal file next to it. This tool reads the main file only. Close Audacity and re-save first.

Legacy .aup needs its _data folder

A .aup file is only the recipe; the audio is in the _data folder's .au files. Without the folder you get the full structure but no audio, waveforms or playback.

.aup4 is best-effort

Audacity 4 projects use the same layout and structure names as .aup3, so the same reader opens them — but Audacity gives no format guarantee to third-party readers, and a future release could change the layout.

Large projects skip audio rebuild

Rebuilding the mix needs the whole project in memory. Above about 100 million samples per channel the audio rebuild is skipped with a plain message; the inventory and exports still work.

Not an editor or a repair tool

You cannot change tracks, move clips or save a modified project, and a corrupted database is reported — with the missing blocks named — rather than repaired. Open it in Audacity to edit or recover it.

Frequently asked questions

What is an .aup3 file?

An .aup3 file is an Audacity 3 project: a SQLite database that holds the whole project — the track and clip structure plus all the audio. The structure is stored in the project's `project` table as Audacity's binary-serialised XML, and the audio lives in the `sampleblocks` table as small blocks of samples. Earlier Audacity versions used a plain-text XML .aup file plus a _data folder of .au audio files, and Audacity 4 uses .aup4, the same idea in a newer container. This tool reads all three formats directly in your browser.

Does my Audacity project upload anywhere?

No. Your project is read entirely on your device: the SQLite database is opened with sql.js in the browser and the project structure is decoded with plain JavaScript — no server, no account, no uploads. The only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the opener.

Can I listen to my project in the browser?

Yes. The tool rebuilds the mix from the project's own sample blocks — each track's clips are placed on the timeline with the track's gain and pan — and plays it with the Web Audio API. Two honest limits: effects, volume envelopes and track automation are not applied, so you hear the project with effects bypassed; and very large projects (over about 100 million samples per channel) skip the audio rebuild to stay inside browser memory, though the track list and exports still work.

Does it work with Audacity 4 (.aup4) files?

Yes, on a best-effort basis. Audacity 4 projects use the same SQLite layout and the same project structure names as .aup3, so the same reader opens them. Audacity gives no format guarantee to third-party readers, and a future Audacity 4 release could change the layout — if a .aup4 file fails to open, that is the likely reason, and opening it in Audacity 4 and exporting the audio is the reliable fallback.

What if Audacity was still open when I copied the project?

Then the file you copied may be behind: while Audacity is running it keeps the newest edits in a -wal file next to the project, and only folds them into the main .aup3 when it closes cleanly. This tool reads the main file only and does not apply the -wal, so the newest edits would be missing. Close Audacity, let it finish saving, and drop the project file again. If Audacity crashed, open the project in Audacity first so it can recover, then save a clean copy.

What can I export from my project?

Four things, all built on your device: a CSV of every track and clip (name, start, end, duration, samples, sample rate, gain, pan, muted), a JSON file with the full project structure, the labels as a tab-separated text file in the format Audacity's File, Import, Labels reads back, and the rebuilt mix as a 16-bit stereo WAV. The WAV is the mix with effects bypassed — for the finished, effected audio, export from Audacity itself.

What can't this tool do?

It is an inspector and player, not an editor: you cannot change tracks, move clips or save a modified project. It does not render effects, envelopes or automation, does not apply a -wal file, and cannot recover a corrupted database beyond reporting which blocks are missing. A legacy .aup file shows its structure without audio unless you also drop its _data folder, because the audio lives in those .au files, not in the .aup itself. And it cannot open a project that only exists as exported audio — a WAV or MP3 has no track structure to inspect.