App Permission Audit Planner: find the apps holding permissions they don't need.

List the apps on your phone, tick the permissions each one holds — location, camera, microphone, contacts and more — and get a plan: which permissions to keep, downgrade or revoke, with a risk score for every app.

  • Your app list never leaves the device
  • Keep, downgrade or revoke — per permission
  • Risk score for every app
  • Printable plan + CSV export

Audit your apps

Add the apps on your phone — start with the ones you distrust most. Check what each one holds in your phone's Settings first (iPhone: Settings, Privacy and Security; Android: Settings, Security and privacy, Privacy, Permission manager), then tick the same boxes here.

Add an app

What else does it hold? Tick every permission this app currently has.

Tick what the app holds now, not what you think it should hold — the plan is the difference between the two. If an app holds nothing, there is nothing to audit.

Your apps

No apps yet. Add your most suspicious app above — or load the sample list below to see a finished audit first.

    Add apps, then press Build my audit. Everything stays in your browser. Nothing is uploaded.

    No apps yet. Everything stays on this device. A sample list is available below if you want to see a finished audit first.

    Privacy you can verify, not just trust

    Most permission tools need to be installed on your phone — and an installed app that audits your permissions needs permission to look at your other apps, which is the very thing you are trying to limit. This one can't: it is a web page, and a web page cannot see the apps installed on your phone or the permissions they hold. Your app list is stored in your browser's local storage on this device. Your app list never leaves the device — the only third-party requests are the site's own analytics, which count page views — and it uploads nothing, ever. There is no server to send it to. Don't take our word for it:

    New cross-origin requests during use: 0
    1. Press F12 to open developer tools, then the Network tab.
    2. Add an app and build an audit above. Watch: apart from the site's analytics, nothing new is requested — no uploads, and no app data ever leaves your device.
    3. Extra credit: disconnect your internet after this page loads — adding apps and building the audit still work.

    How to audit which apps hold which permissions

    Every app you install asks for permissions, and most people say yes to all of them — then forget. A free torch ends up with your contacts, a game with your microphone, a shopping app with always-on location. No single grant is a disaster, but the pile is the problem: each one is a door you left open. The fix is not deleting everything (your maps app needs location) and not ignoring it (the torch does not need your contacts). It is checking every app against what that kind of app actually needs, then narrowing or removing the rest.

    When you build an audit here, your browser:

    1. Takes your grants — for each app, what kind of app it is, how often you use it, and which permissions it currently holds. Check them in your phone's Settings first: iPhone, Settings, Privacy and Security; Android, Settings, Security and privacy, Privacy, Permission manager.
    2. Applies one fixed rule — a grant is kept only when that kind of app genuinely needs that permission at that level. Anything else is revoked, and location "always" or photos "full access" are downgraded when a narrower level does the job. Every verdict on your plan carries the reason it was chosen, so you can disagree with it and keep the grant.
    3. Scores the exposure — a risk score per app from the weights of its risky grants (location "always" 10, SMS and call logs 9, camera and microphone 8), banded Low, Medium, High or Critical, plus a count of risky grants before the plan and after it.
    4. Writes the audit down — a per-app table sorted by risk, with the revoke, downgrade and keep lists and the iPhone and Android steps for applying them, ready to copy, download, export as CSV or print and work through in about ten minutes.

    What makes this audit planner different

    The pages that top the results for this search fall into three groups, and none of them does this job. APK analysers inspect an app file before you install it — useful, but they say nothing about the forty apps already on your phone. Permission-checker apps must be installed, and an installed auditor needs permission to look at your other apps. And the how-to articles explain the settings clearly but leave you to sort forty apps by hand. This page is the only free, no-install, no-account, fully client-side planner we found that does all four: rates every app you already have against what its kind genuinely needs, assigns a keep, downgrade or revoke verdict per permission with a stated reason, scores each app's exposure, and prints an audit with the steps to apply it — with a live network-request counter so you can verify the privacy claim yourself. It runs entirely in your browser — there is no server to upload to.

    When is an audit the right choice — and when is it the wrong one?

    An audit is right when your phone has apps you installed years ago and you have never looked at what they hold. The usual result is a short list of surprises — a torch, a game, a free photo filter — holding sensitive permissions they never needed, and five minutes of revoking fixes most of it. It is the wrong choice as a one-off clean-up you never revisit: apps ask for new permissions with updates, new apps arrive, and your habits change, so re-run the audit every few months and keep the list honest.

    Honest limitations

    It cannot see your real permissions

    It does not read your real permissions — a web page has no access to the apps installed on your phone or the permissions they hold. The grants are the ones you enter from Settings, so the audit is only as accurate as the boxes you tick — check them, don't guess.

    It cannot change any setting

    This tool writes the audit; you apply it in Settings, which takes about ten minutes. It does not change any setting on your phone — it does not revoke anything or delete any app itself.

    The verdicts are a heuristic

    They come from a needs table that is a judgement call, written down in the open on this page. If a verdict feels wrong for how you use an app — your bank really does need location for branch finding — keep the grant.

    Risk scores measure exposure, not behaviour

    Risk scores are estimated, not measured. An app can hold a permission and never use it. A high score means "too much access", not "this app is spying on you" — the score counts doors left open, not what walks through them.

    One app, two uses

    An app that is both a camera and a social feed may need more than its category allows — photo apps keep full access, social apps don't. If the verdicts clash with how you use the app, trust your use, not the category.

    Your list lives in one browser

    Apps are stored in this browser's local storage only. Clearing browser data, or switching devices, starts the list over — export the CSV if the audit matters.

    Frequently asked questions

    Does this tool read my phone's real permissions?

    No — it cannot. A web page has no access to the apps installed on your phone or the permissions they hold, so this tool is a planning aid built from the permissions you enter yourself: open Settings on your phone, check what each app holds, and tick the same boxes here. The risk scores are estimates from what you entered, not measurements of your phone, and they are labelled as estimates everywhere they appear.

    How does it decide keep, downgrade or revoke?

    By a fixed rule shown on the page. A grant is kept only when that kind of app genuinely needs that permission at that level — a messaging app needs the camera, microphone, contacts and limited photo access; a game needs none of those. A grant the category does not need is revoked. Location set to “always” is downgraded to “while using the app”, because that covers every legitimate use, and full photo access is downgraded to limited access when picked photos are enough. An app you have not used in months has every grant revoked, because it should hold nothing. Every verdict on your plan carries the reason it was chosen, so you can disagree with it and keep the grant.

    What does the risk score mean?

    It is a weighted count of the risky grants an app holds: a revoked grant counts its full weight (location “always” 10, SMS and call logs 9, camera and microphone 8), and a downgraded grant counts half. The total is capped at 100 and banded: 0–19 Low, 20–39 Medium, 40–59 High, 60 or more Critical. It measures exposure, not behaviour — an app can hold a permission and never use it, so a high score means “too much access”, not “this app is spying on you”.

    Why is “always” location worse than “while using”?

    “While using the app” lets it know where you are only while it is open on your screen — enough for navigation, run tracking, live location sharing and finding a nearby shop. “Always” lets it record where you go in the background, all day, even when you never open it. No kind of app in the planner's needs table is treated as needing “always”, so an “always” grant is always downgraded. If one of your apps genuinely needs background location — a family safety app, for example — keep the grant and ignore the verdict.

    What if an app only needs a permission sometimes?

    Keep the grant at the narrower level. A banking app that needs the camera once a year to deposit a cheque keeps the camera, because the planner's needs table lists it; a game that asks for the microphone “for voice chat” does not need it unless you actually use voice chat in that game. The rule is about what the app needs to do its job, not what it asks for — if a verdict feels wrong for how you use the app, keep the grant.

    How do I apply the plan on iPhone?

    Open Settings, then Privacy and Security, and tap a permission type — for example Location Services, Camera or Microphone. Tap an app and choose Never, Ask Next Time, or While Using the App. For location, change “Always” to “While Using the App”; for photos, change “Full Access” to “Limited Access” and pick the photos it may see. To change one app instead, open Settings, scroll down to the app, and use its permission switches. Work down the plan one app at a time; it takes about ten minutes for a typical phone.

    How do I apply the plan on Android?

    Open Settings, then Security and privacy, then Privacy, then Permission manager. Tap a permission type, then tap an app and pick Allow only while using the app, Ask every time, or Don't allow. For location, change “Allow all the time” to “Allow only while using the app”; for photos, change “Allow access to all photos” to “Allow access to selected photos”. Exact menu names vary by phone maker and Android version, so if a menu is missing, search Settings for the app name instead.

    What about apps I never use?

    Remove them. An app you have not opened in months should hold no permissions at all, and deleting it removes every grant at once — the plan flags these apps for removal. If you want to keep one just in case, revoke every permission it holds instead: it can ask again the next time you open it.

    Is my app list uploaded anywhere?

    No. Your app list lives in your browser's local storage on this device only — your app list never leaves the device, and the only third-party requests are the site's own analytics, which count page views. You can verify it yourself with the network-request counter in the privacy section below the planner. Clearing your browser data wipes the list; export the CSV if you want to keep it.